LRT_GraphicsSave_The_Riders_DunesUTV_Crazy
Page 1 of 5 123 ... LastLast
Results 1 to 10 of 44
  1. #1
    Competent Driver Turtle Tim's Avatar
    Join Date
    Jun 2015
    Location
    Oregon
    Posts
    352

    Post your Toyhauler mods here.

    Thought it would be interesting to see (or hear about) some of the mods people have done to their toyhaulers for ease of use or just to make them more comfortable.

  2. #2
    Competent Driver Turtle Tim's Avatar
    Join Date
    Jun 2015
    Location
    Oregon
    Posts
    352
    I'll start with a few things I have done to mine:

    Flipped the axels so it would tow level.
    Replaced all the suspension hardware. Used heavier hardware and wet bolts.
    Changed out the mattress in our bedroom to a nice high quality residential type.
    Added a 4" tube underneath to stow the sewage hose.
    Reinforced the side skirts with struts.
    Bought a Shark vacuum that I still need to mount.

    Things I want to do:
    Add LED's under the awning and underneath along the frame.

  3. #3
    Proficient Driver KNB's Avatar
    Join Date
    Apr 2015
    Location
    Springville Ca
    Posts
    213
    So far I've changed out all the tires, added shelves to the cabinets, installed a 200 watt solar system, temperpedic mattress, satellite tv with a new 32" flat screen. Next on the list is two more solar panels and add inverters with two more battery. I have all the led for the awning, just need to install. Things I want to do are install heavier suspension with shocks

  4. #4
    Competent Driver Turtle Tim's Avatar
    Join Date
    Jun 2015
    Location
    Oregon
    Posts
    352
    Oh ya, forgot I changed the stock ST tires out right away and put BFG commercials on.

  5. #5
    Super Moderator EPL's Avatar
    Join Date
    Apr 2015
    Location
    Bella Vista , CA
    Posts
    8,649
    The only thing I have changed on my toy hauler is the tires after 8 seperated tires i put Goodyear G 614's on it .

  6. #6
    Proficient Driver CrazyCooter's Avatar
    Join Date
    May 2015
    Location
    Redding, CA
    Posts
    277
    I could write a book, but here is a good start!

    1200 watts solar,Outback Flexmax 80 controller, 800ah AGM batteries, 3,000 watt Magnum Hybrid Puresine Inverter.
    2.5" lift, EZflex rockers, Dexter HD shackles w/Neverlube Bushings, Correct Track, Goodyear LRG Tires, Added third axle, and KYB monotube shocks.
    Rewired brakes with 10ga wiring and extra grounds
    Wired the rear spot lights to come on with reverse lights on the truck.
    Upgraded all light fixtures to LED panels with 5050 4000k 48-LED panels
    Morryde pinbox 9" shorter than the OE 1621
    Winegard Sat tracker
    Norcold 12v chest freezer/refer
    Sleep Number bed
    Underbelly Sewer hose storage
    Wired garage with underfloor battery, Powerwerx outlets, and coax for running Ham radio equipment.

  7. #7
    Super Moderator EPL's Avatar
    Join Date
    Apr 2015
    Location
    Bella Vista , CA
    Posts
    8,649
    Quote Originally Posted by CrazyCooter View Post
    I could write a book, but here is a good start!

    1200 watts solar, 800ah AGM batteries, 3,000 watt Magnum Hybrid Puresine Inverter.
    2.5" lift, EZflex rockers, Dexter HD shackles w/Neverlube Bushings, Correct Track, Goodyear LRG Tires, Added third axle, and KYB monotube shocks.
    Rewired brakes with 10ga wiring and extra grounds
    Wired the rear spot lights to come on with reverse lights on the truck.
    Upgraded all light fixtures to LED panels with 5050 4000k 48-LED panels
    Morryde pinbox 9" shorter than the OE 1621
    Winegard Sat tracker
    Norcold 12v chest freezer/refer
    Sleep Number bed
    Underbelly Sewer hose storage
    Wired garage with underfloor battery, Powerwerx outlets, and coax for running Ham radio equipment.
    I don't know if this forum could handle all you have done to you hauler Tony !! LOL

  8. #8
    Road-Hog Driver crazywatson's Avatar
    Join Date
    Apr 2015
    Posts
    570
    Changed out my single 12v battery to 2 6v and changed the light bulbs to led inside.

    Sent from my SM-N920V using Tapatalk

  9. #9
    Super Moderator EPL's Avatar
    Join Date
    Apr 2015
    Location
    Bella Vista , CA
    Posts
    8,649
    I guess i have done outer things to my hauler !! Changed the batteries to 4 6 volt batteries from 1 12 volt batteris and replaced all the lights with led's .

  10. #10
    Proficient Driver CrazyCooter's Avatar
    Join Date
    May 2015
    Location
    Redding, CA
    Posts
    277
    Quote Originally Posted by Turtle Tim View Post
    I'll start with a few things I have done to mine:

    Flipped the axels so it would tow level.
    Replaced all the suspension hardware. Used heavier hardware and wet bolts.
    Changed out the mattress in our bedroom to a nice high quality residential type.
    Added a 4" tube underneath to stow the sewage hose.
    Reinforced the side skirts with struts.
    Bought a Shark vacuum that I still need to mount.

    Things I want to do:
    Add LED's under the awning and underneath along the frame.
    What is this shark vac? I have always regretted not getting the installed vac option.

    Would like to have LED's under the awning too. Seeing the availability and cost coming down over the years.

Page 1 of 5 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •