XPT Blown up

[Controlled Force]

2017 XPT turbo engine blew up over the weekend,stay tuned...

Sent from my SM-N950U using Tapatalk

[DLFoust]

Any idea why ?

[Controlled Force]

Any idea why ??

I'm thinking the intercooler that sits in the plenum are having a known problem for exploding and blowing aluminum metal and antifreeze into the engine

Sent from my SM-N950U using Tapatalk

[EPL]

I'm thinking the intercooler that sits in the plenum are having a known problem for exploding and blowing aluminum metal and antifreeze into the engine

Sent from my SM-N950U using Tapatalk

I'm looking forward to hearing what you find !!

[Controlled Force]

So after looking at how much dirt was in the engine I went back and started looking at the air Box in all the intake plumbing and found this broken sensor that had peeled away from the plastic intake tube... After everything I've seen from Polairs this does not surprise me

Sent from my SM-N950U using Tapatalk

[Controlled Force]

So after looking at how much dirt was in the engine I went back and started looking at the air Box in all the intake plumbing and found this broken sensor that had peeled away from the plastic intake tube... After everything I've seen from colors this does not surprise me

Sent from my SM-N950U using Tapatalk

Tear down

Sent from my SM-N950U using Tapatalk

[Controlled Force]

Not to promising

Sent from my SM-N950U using Tapatalk

[Controlled Force]

YUCK, that is dirt and sand in the oil pan

Sent from my SM-N950U using Tapatalk

[Controlled Force]

Here I thought Polaris went to a forged steel rod for the Turbo cars but they still used the same old junk powder metal rods

Sent from my SM-N950U using Tapatalk

[Controlled Force]

All the crank bearings and rod bearings are wiped out, From here everything its Boxed up sent to the machine shop gets hot tanked an cleaned and then I need to assess what new parts we need.

Sent from my SM-N950U using Tapatalk