Moto's factory turbo trans mod

[Controlled Force]

I was draining the oil out of the front diff into a bucket and holding it in a position as if it were mounted in the car,,
Once the oil stopped coming out of the drain plug I decided to roll it back and forth and side to side and cannot believe how much more dirty oil was coming out,
Unfortunately we don't have that option while draining the oil with the diff mounted in the car..
Another bad design by Polaris in my opinion

RSR Performance

[Controlled Force]

RSR Performance

[Controlled Force]

Here's another maintenance tip..
This applies to ALL sxs makes and models, not just Polaris.

Take your secondary clutch off and with a Scotch-Brite pad and you'll see areas on the shaft that are rusted clean that off and apply a thin coat of anti seize.

Make sure you also clean the inside of the secondary clutch as well

RSR Performance

[Controlled Force]

RSR Performance

[Desert900]

I was draining the oil out of the front diff into a bucket and holding it in a position as if it were mounted in the car,,
Once the oil stopped coming out of the drain plug I decided to roll it back and forth and side to side and cannot believe how much more dirty oil was coming out,
Unfortunately we don't have that option while draining the oil with the diff mounted in the car..
Another bad design by Polaris in my opinion

RSR Performance

All the more reason to adopt shorter drain intervals, eh?

[Controlled Force]

A lot of bit of nastiness on that drain plug for a car that doesn't have that many miles on it

RSR Performance

[gridman]

Ben be easy on Moto I need to talk him into a Sled next year LOL

[Controlled Force]

Ben be easy on Moto I need to talk him into a Sled next year LOL

Tell him to buy a Yamaha, and he'll have no worries😉

RSR Performance

[crazywatson]

Polishing the shaft, now that's good customer service!

Sent from my SM-N920V using Tapatalk

[Controlled Force]

Polishing the shaft, now that's good customer service!

Sent from my SM-N920V using Tapatalk

Easy now Watson....
I don't know if I like your interpretation of polishing shafts😂

RSR Performance