Radios.

[Coreyavs]

Both rugged and Baefong handhelds worked great. I will need to get better ear pieces. The stock ones start to hurt. Btw, anyone know why some people sound very quiet and others are loud?

Sent from my SM-N920V using Tapatalk

[LBR]

Both rugged and Baefong handhelds worked great. I will need to get better ear pieces. The stock ones start to hurt. Btw, anyone know why some people sound very quiet and others are loud?

Sent from my SM-N920V using Tapatalk

More often than not it is the distance peeps place their microphone from their mouths. We had a couple quiet ones down in Ocotillo during preride...the leader would tell "Joe" to move his mike where it was almost touching his lips....that was the issue with them.

[baloo]

I got a Baofeng uv5r and got all the programs installed to program it. so i already put BajaPits on it what other channels do you all recommend putting on it?

[Ed Harvey]

Mount for your hand held radio with a case. Parts list on what have you done.

Sent from my SCH-I535 using Tapatalk

[Ed Harvey]

Sent from my SCH-I535 using Tapatalk

[EPL]

Sent from my SCH-I535 using Tapatalk

Good idea Edd !!

[Ed Harvey]

Thanks . I forgot 1peace I used a u-bolt flat bar thru the belt loop for the top mount.

Sent from my SCH-I535 using Tapatalk

[CrazyCooter]

Looks good!

What have you got going on for the antenna? I have never seen that type of connector.

[Ed & Charlene]

s-l1600.jpg
General Specification

Frequency Range

RX: 108.000-520.000 MHz & 700.000-999.990 MHz;

TX: 136.000-174.000 MHz & 400.000-470.000 MHz

Channel Capacity

1105

Channel Spacing

5/10/12.5/15/20/25/50/100 KHz

Operating Voltage

DC13.8V±15%

Operating Temperature

-20 ~ +60

RF Power

VHF:50/20/10/5W; UHF:45/20/10/5W

Frequency Modulation

F3E, F2D, F2A

Maximum Deviation

±5KHz (Wide Band), ±2.5KHz (Narrow Band)

Sensitivity

0.8uV (10dB SINAD, 108-137 MHz)

0.2uV (12dB SINAD, 136-174 MHz & 400-470 MHz)

Maximum AF Output

2W (8Ω, 10% THD)

Dimensions(W×H×D)

140mm × 42mm × 168mm

Weight

1kg

[Ed Harvey]

Looks good!

What have you got going on for the antenna? I have never seen that type of connector.

I have a 12" magnet mount on a plate that I have bolted to the roll bar. I have a helmet head set and i was going to put the talk button on the shifter so all the cords are between the seats.

Sent from my SCH-I535 using Tapatalk