LRT_GraphicsSave_The_Riders_DunesUTV_Crazy
Results 1 to 7 of 7
  1. #1
    Proficient Driver
    Join Date
    Apr 2015
    Location
    Michigan
    Posts
    272

    Commander exaust

    Are there any good aftermarket systems for the commanders ?

  2. #2
    Bumbling Driver Meathead's Avatar
    Join Date
    Jul 2016
    Location
    Foresthill, CA
    Posts
    21
    I just purchased the Yoshimura specifically made for the Can Am. It should arrive this week. I'll try to make a video of the before and after.
    Adulthood has taught me you don't need fun to have alcohol.

  3. #3
    Super Moderator The Rattler (BLR)'s Avatar
    Join Date
    Apr 2015
    Location
    Florence, Oregon
    Posts
    4,425
    Quote Originally Posted by Meathead View Post
    I just purchased the Yoshimura specifically made for the Can Am. It should arrive this week. I'll try to make a video of the before and after.
    Yoshimura duals is what cmes stock on the Turbo Maverick and I really like the sound and it is one of the quietness (db) out there on the market.
    Don't Run Out Of Talent

  4. #4
    Bumbling Driver Meathead's Avatar
    Join Date
    Jul 2016
    Location
    Foresthill, CA
    Posts
    21
    I picked up the single slip-on. I ruled out duals when I discovered most needed a bed tilt limiter or needed to be placed too far into the wheel opening.
    Adulthood has taught me you don't need fun to have alcohol.

  5. #5
    Bumbling Driver Meathead's Avatar
    Join Date
    Jul 2016
    Location
    Foresthill, CA
    Posts
    21
    Adulthood has taught me you don't need fun to have alcohol.

  6. #6
    Skillful Driver Mike621's Avatar
    Join Date
    May 2015
    Location
    Lincoln Ca,
    Posts
    1,675
    Nice , let us know how it sounds once you get it installed.


    Sent from my iPhone using Tapatalk

  7. #7
    Bumbling Driver Meathead's Avatar
    Join Date
    Jul 2016
    Location
    Foresthill, CA
    Posts
    21
    I got the old one off without removing the bed. I had hoped to have the new one on by now since the installation appears straightforward. Unfortunately the instructions are all photos and very little text. The unfortunate part about living in the middle of nowhere is that I am 25 miles from an auto parts store. The instructions make no mention of the graphite gasket needed to complete the installation and one is not included. Anyone else considering this setup would be wise to purchase a gasket prior to installation. The inside diameter will be 1.75" or slightly less than 45mm, the OD will be 2.3 inches or about 59mm.

    I'm not getting off this hill until tomorrow, so I'll complete the installation then.
    Adulthood has taught me you don't need fun to have alcohol.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •