Printable View
Trans mods, Manual Cam chain tensioner, billet intake manifold and gear reductions,its been busy,my doors never close here I am work on the weekends,what's wrong with this picture I should be out playing [emoji848]https://uploads.tapatalk-cdn.com/201...42960e54f3.jpghttps://uploads.tapatalk-cdn.com/201...5cc79e039a.jpghttps://uploads.tapatalk-cdn.com/201...51a85398f7.jpghttps://uploads.tapatalk-cdn.com/201...6c1689598d.jpg
Sent from my SM-N950U using Tapatalk
Typical leak on the transmission 9 out of 10 cars I see leak in the same spothttps://uploads.tapatalk-cdn.com/201...ccb1236b03.jpghttps://uploads.tapatalk-cdn.com/201...f78a2f9f38.jpghttps://uploads.tapatalk-cdn.com/201...e0d2f3b040.jpg
Sent from my SM-N950U using Tapatalk
Not happy with what I see here, There's a lot of dirt attached to the throttle body somehow it's getting past the filtration system?
There's also means there's dirt in the engine and that's not good.https://uploads.tapatalk-cdn.com/201...99b13b73f1.jpghttps://uploads.tapatalk-cdn.com/201...3b697ba470.jpg
Sent from my SM-N950U using Tapatalk
That clean spot on the throttle blade is what I just wipe with my fingerhttps://uploads.tapatalk-cdn.com/201...beb3474003.jpg
Sent from my SM-N950U using Tapatalk
You need to come down and ride with us CraziesAttachment 2944
Sent from BLR Logistics
Where you guys at?Quote:
Originally Posted by The Rattler (BLR)
Sent from my SM-N950U using Tapatalk
Dove Springs !!Quote:
Originally Posted by Controlled Force
Sent from my SM-G950U using Tapatalk
Dirt is no good! Glad everything g is getting taken care of! Thank you Ben!
I noticed that Scott’s car is in there and he has a particulate filter on it. Was that from his car?Quote:
Originally Posted by Controlled Force
Sent from my iPhone using Tapatalk
Yes,his dads car has it alsohttps://uploads.tapatalk-cdn.com/201...33d8ce3543.jpghttps://uploads.tapatalk-cdn.com/201...4985d3f97c.jpgQuote:
Originally Posted by Pipelayer
Sent from my SM-N950U using Tapatalk
Im interested to find out where the dirt came from.
Sent from my iPhone using Tapatalk
Yea me too, That's the whole point of having a S&B particulate filter on it.Quote:
Originally Posted by Pipelayer
Sent from my SM-N950U using Tapatalk
If I had to guess it’s from when I did a stupid diy intake and had the filter in the bed. Since putting on the s&b my filter doesn’t get hardly any dirt mainly just fine dust but when I’ve taken the filter off it’s all clean inside.
Everything going back together nicely should be done by time you guys get herehttps://uploads.tapatalk-cdn.com/201...9142e05aeb.jpg
Sent from my SM-N950U using Tapatalk
All done ready for some play time!https://uploads.tapatalk-cdn.com/201...af8729f107.jpg
Sent from my SM-N950U using Tapatalk
Next on the chopping block project for todayhttps://uploads.tapatalk-cdn.com/201...95162c6cdd.jpghttps://uploads.tapatalk-cdn.com/201...03d089d550.jpghttps://uploads.tapatalk-cdn.com/201...40501e7907.jpghttps://uploads.tapatalk-cdn.com/201...87dd698741.jpg
Sent from my SM-N950U using Tapatalk
...https://uploads.tapatalk-cdn.com/201...db44919f7e.jpghttps://uploads.tapatalk-cdn.com/201...8251c1e3a8.jpg
Sent from my SM-N950U using Tapatalk
All coming apart nicely https://uploads.tapatalk-cdn.com/201...a67fff5699.jpghttps://uploads.tapatalk-cdn.com/201...7c2ece049d.jpghttps://uploads.tapatalk-cdn.com/201...e6afb8ec44.jpghttps://uploads.tapatalk-cdn.com/201...85846dd9b4.jpg
Sent from my SM-N950U using Tapatalk
Now the fun begins, I'm also doing a gear reduction in this one along with the bearingshttps://uploads.tapatalk-cdn.com/201...41beb66895.jpghttps://uploads.tapatalk-cdn.com/201...2ebb1f6572.jpghttps://uploads.tapatalk-cdn.com/201...2defe52d33.jpghttps://uploads.tapatalk-cdn.com/201...9867c2a697.jpg
Sent from my SM-N950U using Tapatalk
New one on lefthttps://uploads.tapatalk-cdn.com/201...b83063693c.jpghttps://uploads.tapatalk-cdn.com/201...fdbccdf524.jpg
Sent from my SM-N950U using Tapatalk
Is he going with a larger tire size?
Sent from my iPhone using Tapatalk
32s on 15sQuote:
Originally Posted by Pipelayer
Sent from my SM-N950U using Tapatalk
Getting rid of the stock rubber boots, In favor of a billet aluminum intake.https://uploads.tapatalk-cdn.com/201...2fcb6f1cb6.jpg
Sent from my SM-N950U using Tapatalk
Getting it done,so now I can finally go play!https://uploads.tapatalk-cdn.com/201...2e699d59f8.jpghttps://uploads.tapatalk-cdn.com/201...2304b72d18.jpghttps://uploads.tapatalk-cdn.com/201...00ada100fa.jpghttps://uploads.tapatalk-cdn.com/201...0a590dc0c9.jpg
Sent from my SM-N950U using Tapatalk
If he rides like I do, he’ll be happy with that setup[emoji594][emoji100]Quote:
Originally Posted by Controlled Force
Sent from my iPhone using Tapatalk
Looking forward to go on one of you rides!Quote:
Originally Posted by Pipelayer
Sent from my SM-N950U using Tapatalk
It’s my brothers RZR so pretty much the same riding. [emoji1303]Quote:
Originally Posted by Pipelayer
I’m going to Johnson lane to do a camp and ride weekend on the 26-28. You’re probably going to sand mountain that weekend, but if not I’ve got some cool rides planned.Quote:
Originally Posted by Controlled Force
Sent from my iPhone using Tapatalk
I'm going to Dumont dunes but after that anytimeQuote:
Originally Posted by Pipelayer
Sent from my SM-N950U using Tapatalk
He’ll like it for sure, did you and Don just get the bearing upgrade or did you do the gear mod too?Quote:
Originally Posted by Jeepalive
Sent from my iPhone using Tapatalk
Did the bearing mod and the manual Cam chain tensionerQuote:
Originally Posted by Pipelayer
Sent from my SM-N950U using Tapatalk
Great, no more rattle at startup[emoji106]Quote:
Originally Posted by Controlled Force
Sent from my iPhone using Tapatalk