Each time I have mount my tires on beadlocks the tire sat down on the lip !! What is the problem ?, Is the tire to large and falls off the lip or to small to fit on the lip ?Quote:
Originally Posted by drtfun
Printable View
Each time I have mount my tires on beadlocks the tire sat down on the lip !! What is the problem ?, Is the tire to large and falls off the lip or to small to fit on the lip ?Quote:
Originally Posted by drtfun
Hard for me to see, but mine set on top of the lip and the ring compresses the bead against it. Can't tell with the pics.Quote:
Originally Posted by drtfun
Sent from my iPhone using Tapatalk
The bead sits in that litle step down area and when I get all the way around to just 3 bolt hole are left to force the bead over it pops up somewhere else.
I have it set on a bucket with my knees holding the tire in place so it wont pop up somewhere and I just cant force it over and into that lip/groove area.
have gloves on cuse the tire is so damn slick with lube you cant hold it bare handed. will get some beter pics tonight when I try again
Got cha, I haven't had that problem before. Have you tried putting in a few of the bolts with flat washers to hold the opposite side down until you get the last side over the step down?
Sent from my iPhone using Tapatalk
Yep still didnt helpQuote:
Originally Posted by Pipelayer
so called Tim at extreme tire where I bought the tires he said to sand a small bevel on the inside of the bead to help it slide over the lip
so will see
Cool, good luck with it Terry.Quote:
Originally Posted by drtfun
Sent from my iPhone using Tapatalk
Let us know how it works !!Quote:
Originally Posted by drtfun
got it, this is the stupid lip
Attachment 1625
Tim said to bevel inner edge pics fuzzy but maybe you can see
Attachment 1626
Tadahh
Attachment 1627
Nice looking wheels Terry.
Sent from my iPhone using Tapatalk
[emoji122][emoji112][emoji122][emoji112][emoji122][emoji112]Quote:
Originally Posted by drtfun
Sent from my iPhone using Tapatalk
Tires finally mounted
Attachment 1636
Look great Terry
Sent from my iPhone using Tapatalk
Got my isota cargo box today
http://uploads.tapatalk-cdn.com/2016...42bc1e1ea2.jpghttp://uploads.tapatalk-cdn.com/2016...88dcab3b34.jpg
Sent from my iPhone using Tapatalk
Like it
Sent from my iPhone using Tapatalk
So do you think it was worth the money ?Quote:
Originally Posted by Pipelayer
box and tires look great Jeff
x 2Quote:
Originally Posted by pipelayer
Nice looking box .Quote:
Originally Posted by EPL
Yes, it's very nice, went muffing today and it's so nice to keep all of my stuff clean and dry. I like how it tapers down in the back so I can see under the spare tire to back up.. Good call EdQuote:
Originally Posted by EPL
Sent from my iPhone using Tapatalk
Thanks Terry.Quote:
Originally Posted by drtfun
Sent from my iPhone using Tapatalk
Russell (washrepair) was the first one I know to get one !! I like the way it tapers to get the max room !! I assume the strips in the front are to hold a spare belt !!Quote:
Originally Posted by Pipelayer
Yep, gonna see wash repair in the morning in VC. I've been trying to figure out what the straps are for... lolQuote:
Originally Posted by EPL
Sent from my iPhone using Tapatalk
That was the only thing I could think of !! You guys have a good ride , wish i could come !!Quote:
Originally Posted by Pipelayer
I think you can fit a beer can in each one.... Hmmm. Got a foot route planned... You're missin out again. I'll post up some pics later
Sent from my iPhone using Tapatalk
Rub it in !! Looking forward to seeing the pictures !!Quote:
Originally Posted by Pipelayer
That looks Sweet!!Quote:
Originally Posted by Pipelayer
Sent from my iPhone using Tapatalk
Thanks Ben, I'm really happy with the box. When I took it out of the box that it came in, it looked too big to fit. It installs in minutes and is very sturdy and light.
Sent from my iPhone using Tapatalk
Jeff, did you see that they make a spare tire mount that goes right on top of the lid of the box? I think it comes with heavier struts and it just lifts up with the lid. They are a great company to deal with. I was one of the first ones to buy their lower doors. I recommend them to everybody that asks. In fact, they make a harness bar specifically for the polaris 6 point belts in the 4 seater. But it was about $450 and I wanted to make my own. I asked them about selling me just the mounting tabs for the retractors. They are going to make me 4 tabs and ship them to me. I didn't know if they would be willing to do it because they could have just said, buy our harness bar instead. Great guys.
Got the intrusion bars installed today. Pulling the cage this week grind off all excess tabs, finish running the fish wire through it and off the powder coater.
They do make a nice spare mount for the box, I may get one some day .Quote:
Originally Posted by neil11975
Shocks and suspension installed. Almost Done and ready for Sale. http://uploads.tapatalk-cdn.com/2016...d3eb76cb1e.jpghttp://uploads.tapatalk-cdn.com/2016...850a08be19.jpghttp://uploads.tapatalk-cdn.com/2016...0c1df32c8e.jpg
I had my shocks serviced too and found out the Nitrogen bleeds down. All 4 shocks were around 60-65psi. Should be 120psi.
Sent from my iPhone using Tapatalk
Looking good !!
Neil, I was looking at Russell's today and that's how he has his setup, sweet setup, I like it. Makes it a lot easier to get into the box and cuts down on the excess weight that the spare tire mount adds. When I bought my box, I was concerned about the excess weight on the box, but after I got the box, I could see how solidly it was built. I'm going to put on an aftermarket cage soon and I'm going to change it thenQuote:
Originally Posted by neil11975
Sent from my iPhone using Tapatalk
Looks nice Ben, you're not going to want to sell it when you get done
Sent from my iPhone using Tapatalk
You may be right.... It looks better than it did when it was new. But I really!!!!!!! Want the New Turbo[emoji100]Quote:
Originally Posted by Pipelayer
Sent from my iPad using Tapatalk
Me tooQuote:
Originally Posted by Airbus899
Sent from my iPhone using Tapatalk
Looks good[emoji106]🏽Quote:
Originally Posted by Sandfreak
Went to Pismo. Also installed a spare tire rack, tire and Pro Armor quickshot accessory rack with shovel, jack, flashlight and fire extinguisher.
Attachment 1647
Attachment 1648
http://uploads.tapatalk-cdn.com/2016...623413d471.jpg new front bumper and light bar installed today
Sent from my iPhone using Tapatalk
Looks good Bob, looks like I'll be in town next Saturday, if your home I'll come by and check it out.Quote:
Originally Posted by lainracing
Sent from my iPhone using Tapatalk