Good to hear, I've seen a lot of good feed back from CT Raceworx, I had them do my reflash, and really want to get that front sway bar. [emoji106]🏽
Can-Am XDS 1000 Turbo.
Printable View
New steering quickener kit for my Can-Am Maverick from ABF Fabrication 1.5:1 steering ratio w/quick release steering wheel.
Attachment 1970
How did the reflash work out? I am on the fence on doing this reflash with Alex or going with Mr Rpm... What stage did you do? I would like the stage 3 but not ready to plunk down the coin for new mufflers all at once. I also very curious on the sway bar kit it looks like a must have. By the time I finish adding mods, it will be time for a new one...
Yeah I didn't have the cash for stage 3 either, I went with stage 2 stock exhaust.
It runs much better with the reflash, I did it mostly for all upgrades it bring, and gets rid of stupid safety things the factory puts it there, turn around time not to bad , about a week, if you do it there's a video on YouTube that shows you how to remove ECU , it's not hard, but help to watch video.
Sent from my iPhone using Tapatalk
nothing to the RZR today going to start fixing the trailer :mad:
That's why I started replacing my trailer tires every 2 to 3 years to try to avoid that. It doesn't take long in the California sun for them to go bad and start flying apart on a hot day. Tires used to last a lot longer than the cheap crap we get today
bought all new goodyears should be ok for a year or two and I started covering them like the RV
I had 8 tires go bad on my toy hauler , now that I have replace them all with Goodyear G614's I drive stress free !!
Attachment 1998
Before
Attachment 1999
After