Nothing yet, but we need to prep for March Madness.. Change belt, order a CV boot, and find forward gears in the Maverick,
Printable View
Nothing yet, but we need to prep for March Madness.. Change belt, order a CV boot, and find forward gears in the Maverick,
Just got off the phone with Jed.... Getting the service done next Tuesday, 2/21, first thing in the morning. Should be done there around 10:00, and to your house by noon. OK?Quote:
Originally Posted by EPL
That will work !!Quote:
Originally Posted by AlfaBaz
Installed a 17 in led light bar
Belt Change, Found forward gears, need to mount side mirrors to see who is behind me.. :( forget that last statement.. I'm normally the last one. :). Oh Mother hen here..making sure everyone makes it back to camp for A COLD ONE :)
I know I've said this before, but knowing that you and Lance are behind us is is the ultimate confidence builder. I know Barb will always be right where I expect her to be, and I know Lance is the best navigator I've ever met so we absolutely cannot get lost!Quote:
Originally Posted by BLR
I don't mind being last and making sure everyone makes it back to camp.. however.. 38mph on the highway for miles is a little excessive when I NEED A BEER at Middlegate. :)Quote:
Originally Posted by AlfaBaz
:cool:Quote:
Originally Posted by BLR
Installed Shock Therapy Level 4 Springs, and had the shocks re-valved. Can't wait to try them out!
See you tomorrow, Ed!Quote:
Originally Posted by EPL
Quote:
Originally Posted by AlfaBaz
I'll be here !! Maybe !! LOL
1. Watched Ed mount my Badlands 5000# winch, and
2. Fabricated mounts and mounted new rearview mirrors.
http://cloud.tapatalk.com/s/58b7461b...01_140404.jpg?
Got the external speaker running through the 400 watt amp. No problem hearing it.[emoji1]
Sent from my SM-G900T using Tapatalk
radio and gps installed
Attachment 2269
Attachment 2270
Installed new high clearance A-arms. I used my $250 Polaris coupon towards buying these. They are actually built much better than the stock ones. You can see on the before picture that I already tried to make my own high clearance arms. Lolhttps://uploads.tapatalk-cdn.com/201...c3aff11d51.jpghttps://uploads.tapatalk-cdn.com/201...6ce191abac.jpg
Sent from my SM-G900V using Tapatalk
Looks good[emoji1360]ready for Sand Mountain desert rides!Quote:
Originally Posted by neil11975
Sent from my iPhone using Tapatalk
That's the plan. [emoji3]Quote:
Originally Posted by Airbus899
Sent from my SM-G900V using Tapatalk
Nice Niel, I've got the same ones on mine. [emoji106]
Sent from my iPhone using Tapatalk
I would like to put some on my Turbo but they hit the sway bar !!
They make them for the Turbo models with the front sway bar as well. I have them on mine[emoji1360]https://uploads.tapatalk-cdn.com/201...8040dd1c7f.jpgQuote:
Originally Posted by EPL
Sent from my iPhone using Tapatalk
Installed my new diff from Hawk Engineering! Now just waiting on hubs/rotors to arrive Wednesday to get her trail ready!
Sent from my iPad using Tapatalk
I had one for the Turbo and when I was at St Anthonys it flexed enough to hit it and pushed it out one side !!Quote:
Originally Posted by Airbus899
Wow that's crazy... mine are the Factory High clearance arms. Maybe they are different? So far so good tho. I do wish I had a few more inches of travel in the front end. I may add a long travel kit later.Quote:
Originally Posted by EPL
Sent from my iPhone using Tapatalk
Quote:
Originally Posted by Airbus899
Mine were not factory but looked just like them and looked like there was plenty of clearance but I went down into a larger dip and heard a loud noise and found the sway bar hanging out one side and the bushings gone !!
Finally got my roof finished https://uploads.tapatalk-cdn.com/201...58498eb506.jpg
Sent from my SM-G900T using Tapatalk
Looks good[emoji106]Quote:
Originally Posted by N6EDW
Sent from my iPhone using Tapatalk
Quote:
Originally Posted by Pipelayer
Looks good N6EDW !!
After 14 months I FINALLY made it a priority and got the rzr back together!!! Took a rip around the block and around the park, hope nobody turns me in ahaha
Sent from my iPhone using Tapatalk
Installed Maverick X3 72" Billet Proof High Clearance Radius Rod Kit.
Attachment 2295
Quote:
Originally Posted by Maverick4me
They look nice , I thought the stock ones were big already ?
Installed Polaris High Clearance Radius Rods (Used my $250 voucher).
Attachment 2296
Looks like a few of us had the same ideas. Now that my front is done, the rears will be next.Quote:
Originally Posted by TOD
Sent from my SM-G900V using Tapatalk
Quote:
Originally Posted by TOD
Looks good , i'm glad I changed mine !!
How are you liking that gps unit? Would you recommend it?Quote:
Originally Posted by N6EDW
LOVE IT, yes I would recommend it.
Sent from my SM-G900T using Tapatalk
Cool :cool:
Redneck toe adjustment https://uploads.tapatalk-cdn.com/201...9bf815a0cd.jpg
Sent from my SM-G900T using Tapatalk
Up a the Cinco ride, my car started running really rough and wouldn't idle. I checked the code on it and it was 105. 3 which was the map sensor on the intake. I checked on the internet and found that the plug and wires that hook to the map sensors commonly go bad or the wires break. I found a video on you tube that show how to test it. Sure enough that's what it was. I found a plug replacement kit at weller racing. https://uploads.tapatalk-cdn.com/201...8810e48457.jpghttps://uploads.tapatalk-cdn.com/201...e05555ff99.jpghttps://uploads.tapatalk-cdn.com/201...88804f6bad.jpg
I crimped and soldered the connections and heat shrink wrapped the connections. Hooked the battery back up and fired it up. Runs as good as it ever did. The kit was 70.00 ( that's usd not pesos lol) for that kit. They also recommend changing the injector wires and plugs, so I'll be changing Those very soon.
Sent from my iPhone using Tapatalk
Good job Jeff, always good feeling when you find the problem and fix it yourself. [emoji1417]