Good to hear, I've seen a lot of good feed back from CT Raceworx, I had them do my reflash, and really want to get that front sway bar. [emoji106]🏽Quote:
Originally Posted by Sandfreak
Can-Am XDS 1000 Turbo.
Printable View
Good to hear, I've seen a lot of good feed back from CT Raceworx, I had them do my reflash, and really want to get that front sway bar. [emoji106]🏽Quote:
Originally Posted by Sandfreak
Can-Am XDS 1000 Turbo.
New steering quickener kit for my Can-Am Maverick from ABF Fabrication 1.5:1 steering ratio w/quick release steering wheel.
Attachment 1970
How did the reflash work out? I am on the fence on doing this reflash with Alex or going with Mr Rpm... What stage did you do? I would like the stage 3 but not ready to plunk down the coin for new mufflers all at once. I also very curious on the sway bar kit it looks like a must have. By the time I finish adding mods, it will be time for a new one...Quote:
Originally Posted by Mike621
Yeah I didn't have the cash for stage 3 either, I went with stage 2 stock exhaust.
It runs much better with the reflash, I did it mostly for all upgrades it bring, and gets rid of stupid safety things the factory puts it there, turn around time not to bad , about a week, if you do it there's a video on YouTube that shows you how to remove ECU , it's not hard, but help to watch video.
Sent from my iPhone using Tapatalk
nothing to the RZR today going to start fixing the trailer :mad:
That's why I started replacing my trailer tires every 2 to 3 years to try to avoid that. It doesn't take long in the California sun for them to go bad and start flying apart on a hot day. Tires used to last a lot longer than the cheap crap we get today
Since I started replacing mine every 3 years I haven't had any problems.Quote:
Originally Posted by KNB
Sent from my SM-N920V using Tapatalk
bought all new goodyears should be ok for a year or two and I started covering them like the RV
I had 8 tires go bad on my toy hauler , now that I have replace them all with Goodyear G614's I drive stress free !!
Attachment 1998
Before
Attachment 1999
After
Looks good! Rubicon Round #2 ready for sure!Quote:
Originally Posted by CHbeer
Sent from my iPhone using Tapatalk
Put some new things over the weekend
1/2 folding windshield
Rear window
Shift knobhttp://uploads.tapatalk-cdn.com/2016...434e12d510.jpghttp://uploads.tapatalk-cdn.com/2016...c5371c7dc9.jpghttp://uploads.tapatalk-cdn.com/2016...f99edb578c.jpg
Sent from my SCH-I535 using Tapatalk
Installed a new belt and clutch cooling fan and a new skid plate. Ready for Bridgeport [emoji594][emoji100]http://uploads.tapatalk-cdn.com/2016...fb9936811b.jpghttp://uploads.tapatalk-cdn.com/2016...53a608cbcd.jpg
Sent from my iPhone using Tapatalk
That Fan is AWESOME Jeff!! No belts blown on my Turbo yet. 700 miles & counting.Quote:
Originally Posted by Pipelayer
Sent from my iPhone using Tapatalk
Yeah I saw the ones that you and Mark had on your cars up on the rubicon. Paul Hart hooked me up. No more hot belt.[emoji106]Quote:
Originally Posted by Airbus899
Sent from my iPhone using Tapatalk
700 miles??? You just got it!!
Lol. Yah buddy. By the end of our Christmas Glamis trip I'll have over 2,000 miles on her. We love to Ride....[emoji100] http://uploads.tapatalk-cdn.com/2016...ee82671405.jpg some more goodies showed up today.Quote:
Originally Posted by mearsman
Sent from my iPhone using Tapatalk
TMW Doors?Quote:
Originally Posted by Airbus899
Sent from my iPhone using Tapatalk
Looks like ace Ventura delivered em
Yup Full doors. I think your right mearsman! Ace was really in a hurry when he packaged these up to deliver. Lol
Sent from my iPhone using Tapatalk
Attachment 2049
Attachment 2050
Getting the roll cage
Sweeet!!Quote:
Originally Posted by CHbeer
Sent from my iPhone using Tapatalk
Finally got my new skids on from Factory UTV. LBR changed all the fluids, greased all the fittings and HotRod and I took it out for a ride..ready for some more adventureshttp://uploads.tapatalk-cdn.com/2016...8e90517a30.jpghttp://uploads.tapatalk-cdn.com/2016...9012cc3e2d.jpg
New tires and wheels
Msa m21 wheels with 32x10x16r motohammers
http://uploads.tapatalk-cdn.com/2016...0ce01da02a.jpg
http://uploads.tapatalk-cdn.com/2016...275dfab5eb.jpg
Weighed it
Full tank with all camp gear
http://uploads.tapatalk-cdn.com/2016...494abc7454.jpg
http://uploads.tapatalk-cdn.com/2016...a8285cf9db.jpg
Sent from my SAMSUNG-SM-G900A using Tapatalk
Looks good !!
Installed a second Odyssey PC925 Battery with Isolator , ran all my accessories to a Blue Sea fuse block. Now my main battery stays at 14.1v with motor running and lights and stuff on. [emoji106]
http://uploads.tapatalk-cdn.com/2016...e786a28063.jpghttp://uploads.tapatalk-cdn.com/2016...e04ddeadfb.jpg
Sent from my iPhone using Tapatalk
Quote:
Originally Posted by Mike621
Sounds like a good modification .
That 925 is an excellent battery...been holding up great for over 4 years in my ride.
Yeah I did some research , went with the odyssey over the Optimal just cause of the size.Quote:
Originally Posted by LBR
Sent from my iPad using Tapatalk
I've used Optimas since the mid 1990s and they were the best gel battery...would hold up like new for 10 years.....but since mid 2000, they drastically dropped in quality performance...even had to have 2 of them adjusted within a year because of a dropped cell. I quit using them in about 2010 because of the poor quality.
Nice.. Let us know how your clutch handles that big of tire[emoji106]Quote:
Originally Posted by norcalrob
Sent from my iPhone using Tapatalk
Osp big tire clutching should be here tomorrow
Weights,primary and secondary springs
Sent from my SAMSUNG-SM-G900A using Tapatalk
I put new high clearance front lower arms on the Turbo today.
http://uploads.tapatalk-cdn.com/2016...aabb1c05be.jpg
Polaris Ed?Quote:
Originally Posted by EPL
Sent from my iPhone using Tapatalk
Autodude , Polaris doesn't make them in white !!Quote:
Originally Posted by Pipelayer
Yep, Black only. Last I spoke to you, you were considering Polaris.Quote:
Originally Posted by EPL
Sent from my iPhone using Tapatalk
I was going to get Polaris but didn't want to pay there price and then have to powder coat them !!
Yeah!, they're almost double the cost of aftermarket. [emoji389]
Sent from my iPhone using Tapatalk
Looks good though[emoji106]
Sent from my iPhone using Tapatalk
Put my maverick on various sites for sale
Sent from my iPad using Tapatalk