Belt Rub

[Turtle Tim]

Saw a thread on rzrforum bout the clutch belt rubbing on the clutch cover. The belt rubs on the edge of the exhaust duct on the inner cover. There is a product that keeps the belt from rubbing on the edge causing excessive heat and damage to the belt.
After seeing the thread, I checked mine. there was a lot of wear right on the edge of the exhaust duct.
Might explain a couple of broken belts I had.
Anybody else hear of this?

here is a link to the product:
http://shop.gforceracingtechnologies.com/products/xp1000900s-slide-guidebelt-deflector

[Beach Leo]

Is Not That a Factory Defect?

Polaris will prolly Recall-em and Fix-em at there cost, when hell freezes over

[Mike621]

Well it would be good to get one, but Leo has a point, the manufactures should step up and back there product.

I had a 08 KTM motorcycle , had about 500-700 miles on it, and the valve cover bolt striped out, took it over to Fator's KTM , manufacture covered all cost, and I was the second owner, I wish KTM made SXS's


Sent from my iPhone using Tapatalk

[Beach Leo]

I was over on otherforum.net Searching>>> belt rubbing cover

Tons of Treads on the Topic

This has been a Polaris problem for at least the last 5 Years

Well its really those who owns a RZR Problem

Polaris is Laughing at us all on the way to the Bank

[Turtle Tim]

When I got to St Anthony, I took my dremel and smoothed out the area where my belt was hitting. Seemed to work, I did not see any more wear in that area.
Still may install the G-force product though.

[neil11975]

I wish KTM made SXS's


Sent from my iPhone using Tapatalk

Me too. But they would probably cost $45,000.

[Mike621]

Me too. But they would probably cost $45,000.

LOL yeah probably , the Ryan Dungey model would be like 55,000. [emoji23]


Sent from my iPhone using Tapatalk

[ryguy745]

I have one on my 14 xp 1000 and yes it has help along with the temp gauge and i also did the Gforce racing 3rd intake duct on it and blower ! don't see temps above 150 very often !!