Secondary spring compression tool [Archive]

neil11975

11-08-2017, 03:02 PM

I am going to order new rollers for my secondary very soon. I was wondering if anyone in the Redding area had a secondary spring compression tool for a RZR. It's a 1000 if that makes a difference. It would be cool if I could borrow instead of either buying one or making my own. Thanks....Neil
2475

Jeepalive

11-08-2017, 04:39 PM

We changed out my brothers clutch and did his rollers and springs in the secondary out at Sand mountain over Halloween. Just had someone stand on the helix take 2 screws out then move your foot stand again to remove the other 2. Worked fine for us. Just an idea if you can’t find the tool

EPL

11-08-2017, 04:52 PM

We changed out my brothers clutch and did his rollers and springs in the secondary out at Sand mountain over Halloween. Just had someone stand on the helix take 2 screws out then move your foot stand again to remove the other 2. Worked fine for us. Just an idea if you can’t find the tool

I watched , didn't seem very hard to do !!

Ajb9

11-08-2017, 06:20 PM

if you go to your local hardware store and pick up a 12" piece of 1/2" threaded stock some nuts and big washers slap it in a vise wouldn't it do the same thing? thats what I use on my STM and that tool looks the same....

crazywatson

11-08-2017, 08:37 PM

I have one down in the bay area if it help at all

Sent from my SM-N950U using Tapatalk

neil11975

11-08-2017, 08:38 PM

There needs to be a gap in between where it's compressed so you can get to a snap ring to remove it. I think I am going to just make this. It looks really simple. Thanks for the suggestions https://uploads.tapatalk-cdn.com/20171109/30c6207550d858ca5cd42e35ba56da6b.jpg

Sent from my SM-G930V using Tapatalk

neil11975

11-08-2017, 08:39 PM

I have one down in the bay area if it help at all

Sent from my SM-N950U using TapatalkThanks for the offer. I think I am going to try to make my own.

Sent from my SM-G930V using Tapatalk

crazywatson

11-08-2017, 08:43 PM

Oh that's cheap and easy right there. Tell us how it works out.

Sent from my SM-N950U using Tapatalk

TOD

11-09-2017, 07:07 AM

I've got one. Located about 25 minutes north of Sacramento if you run into trouble.

neil11975

11-09-2017, 07:45 PM

I've got one. Located about 25 minutes north of Sacramento if you run into trouble.Thanks for the offer.

Sent from my SM-G930V using Tapatalk

neil11975

11-24-2017, 04:41 PM

My homemade tool worked great. It took about about 2 hours from pulling it out of the toy hauler to finishing up. New rollers and everything as clean as new. https://uploads.tapatalk-cdn.com/20171124/66a8c97ab34dca58feb4fb696d07af5d.jpg

Sent from my SM-G930V using Tapatalk

EPL

11-24-2017, 06:15 PM

My homemade tool worked great. It took about about 2 hours from pulling it out of the toy hauler to finishing up. New rollers and everything as clean as new. https://uploads.tapatalk-cdn.com/20171124/66a8c97ab34dca58feb4fb696d07af5d.jpg

Sent from my SM-G930V using Tapatalk

Awesome to hear !!