What have you done to your UTV Today .

[Todd Johnson]

Let's hear from everyone what have you been doing to you UTV . Remember on this forum we an all brand and model forum so as long it's a UTV let's see what you have done to it.

[The Rattler (BLR)]

I washed it!!! Just to get the AZ. Dust off just to get Shasta/Chappie dust to stick....lol

[Hawaii Blonde]

i washed it!!! Just to get the az. Dust off just to get shasta/chappie dust to stick....lol


lol

[Scrat]

Got it MUDDY !

[Ruckzuck]

I got some new tires.

[de3]

taking the one way bearing that controls the engine brake under 10 mph ....... and putting back in my stock sprag springs on the internal wet clutch.2006 A/C prowler

[582RDB]

I got some new doors for mine , now I just have to finish putting them on.

[EPL]

I put a new SLP exaust on my wife's XP1000 .

[Lisa Johnson]

I washed it!!! Just to get the AZ. Dust off just to get Shasta/Chappie dust to stick....lol
dust is easier to remove then that wet clay from down here

[Scoundrel]

Added 3/8" x 1-1.2" eye bolts to the frame as tie down points.

[Beach Leo]

Took windshields off and put Crazy Sticker on it



http://i924.photobucket.com/albums/ad89/LeoBeach/IMG_9555_zpsffs3k3ju.jpg

[Furkay]

I cleaned it so I can get it dirty again . LOL

[mandbklingler]

Staring longingly wanting to go ride......

I did finish the back-up camera install (like what Chad did). Don't know how long it will last - but for $30, its worth the experiment :)

[Ed Harvey]

Just put on a spare tire carrier from utv head quarters .It mounts about center on the rear bars and holds the tire about 2" above the roof line. The mounting bolts are for a steal wheel if you have a aluminum wheel you will need longer bolts. The mount still lets you see out the back with your rearview mirror . The price is 219$ and it is well made.

[EPL]

Just put on a spare tire carrier from utv head quarters .It mounts about center on the rear bars and holds the tire about 2" above the roof line. The mounting bolts are for a steal wheel if you have a aluminum wheel you will need longer bolts. The mount still lets you see out the back with your rearview mirror . The price is 219$ and it is well made.

Do you have any pictures ?

[AlfaBaz]

How about done with my UTV?

Just sprayed 32 gallons of Glyphosphate (Round Up) and 16 gallons of Remedy (broadleaf herbicide).

[XS-Cash]

I'm in the middle of putting an aftermarket cage on my 1000 .

[Mike621]

Replaced tranny oil, installed new air filter, checked oil level, everything good to go


Sent from my iPhone using Tapatalk

[Beach Leo]

Another Poor Mans Fix

This do-dad always leaked oil

So I cleaned it up some today a used hi-temp silicon To stop oil leak


http://i924.photobucket.com/albums/ad89/LeoBeach/IMG_9568_zpsdkpmg9i7.jpg (http://s924.photobucket.com/user/LeoBeach/media/IMG_9568_zpsdkpmg9i7.jpg.html)

[Mike621]

Better than factory now Leo. [emoji106]


Sent from my iPhone using Tapatalk

[Beach Leo]

Better than factory now Leo. [emoji106]


Sent from my iPhone using Tapatalk

Got that right Mike

They should do this at the factory

So I would not have to...lol

[Beach Leo]

Replace front CV Boot

Piece of Cake and Very easy to do

Its just kinda messy

I Love this grease monkey stuff

Its very Fun



http://i924.photobucket.com/albums/ad89/LeoBeach/IMG_9576_zpshfpxfanf.jpg (http://s924.photobucket.com/user/LeoBeach/media/IMG_9576_zpshfpxfanf.jpg.html)

[Ed Harvey]

EPL I will take pics of the tire carrier when I get it out again . Going up to Winchester Bay area this weekend will take pics then and try to post them.

[Ruckzuck]

Replace front CV Boot

Piece of Cake and Very easy to do

Its just kinda messy

I Love this grease monkey stuff

Its very Fun



http://i924.photobucket.com/albums/ad89/LeoBeach/IMG_9576_zpshfpxfanf.jpg (http://s924.photobucket.com/user/LeoBeach/media/IMG_9576_zpshfpxfanf.jpg.html)

Can you get just the boot or do you have to get a whole new axle ?

[EPL]

I just washed mine so I can go riding this weekend and get it dirty !! LOL Never ending battle.

[EPL]

Can you get just the boot or do you have to get a whole new axle ?

You can purchase just the boot .

[DLFoust]

I purchase a new UTV cage .

[EPL]

I purchase a new UTV cage .

What style cage did you get ?

[G Billy]

Not a dam thing sense Ed s SM run..need to find a good local clutch guy

[EPL]

Not a dam thing sense Ed s SM run..need to find a good local clutch guy

You need to get that thing running !!

[Beach Leo]

Can you get just the boot or do you have to get a whole new axle ?

Yep you can get Boot only got this one at>>>http://www.cheapcycleparts.com/oemparts/a/pol/50361931f870023684115da6/engine-magneto

[Ruckzuck]

Got it ready to put away for a while , it's summer time and summer time is for boating.

[Mike621]

Mounted my sound bar between the seats, ready to ride now[emoji41]


Sent from my iPhone using Tapatalk

[Sweet34]

I'm working on putting new doors on mine .

[DLFoust]

Just picked it up from being serviced .

[Lennart]

Put in dalton clutch kit and new gates belt after I cooked my original belt after 1200 miles .

[Ed Harvey]

Put a new belt on the xp1k at the dunes 1030miles on it . Cleaned out everything and put the cover on and magic more peaces had to do that 4 times don't know where they came from but it's magic more peaces.

[Pipelayer]

Put xp4 soft springs on my from end


Sent from my iPhone using Tapatalk

[Beer Mod]

Welded in some beef mounts for new suspension.

[LBR]

Put a new belt on the xp1k at the dunes 1030miles on it . Cleaned out everything and put the cover on and magic more peaces had to do that 4 times don't know where they came from but it's magic more peaces.

That's not too awful bad getting a thousand miles from your belt Ed....many get less and a few get more, so I'd put you in the upper 30% or so.

[EPL]

That's not too awful bad getting a thousand miles from your belt Ed....many get less and a few get more, so I'd put you in the upper 30% or so.

Come on now LBR this is a Polaris he has ,NOT a CanAm !!

[Ed Harvey]

I didn't break the belt in wright and someone said at 800miles I would start to have trouble so I thought i did good at 1030miles . I put a oem belt back on we will see how long it lasts.

[EPL]

I didn't break the belt in wright and someone said at 800miles I would start to have trouble so I thought i did good at 1030miles . I put a oem belt back on we will see how long it lasts.

I don't have any clue about breaking in a belt !! I just get in and drive 6000 mile on my XP 900 , 4800 miles on the 800 S when we sold it and around 1500 on the XP 1000.

[Ed Harvey]

I had a bunch of short high speed runs when i first got it then all of the rides and 2 dune trips . I was at the dunes when i put this one on and I drove it around slow about an hour with one stop to cool off so i will see what happens to this one.

[The Rattler (BLR)]

Just waiting for LBR to install my rugged radio intercom and etc..

[crazywatson]

Just waiting for LBR to install my rugged radio intercom and etc..
Go light a fire under his ass. Lol

Sent from my SM-N900V using Tapatalk

[Beer Mod]

Washed mine today!!

[Mike621]

Picked mine up from the shop today.
Tomorrow going to put a new gauge plate with, belt temp gauge, volt gauge, and two accessories switches.


Sent from my iPad using Tapatalk

[Mike621]

Got my Gauges Installed I think it looks way better that just the empty box that was there[emoji41]10041005


Sent from my iPhone using Tapatalk

[LBR]

Got my Gauges Installed I thing it looks way better that just the empty box that was there[emoji41]10041005


Sent from my iPhone using Tapatalk
Looks sharp....give that Razorback a slight twist to level it when you have a chance tho...lol....I took pics of BLRs but it was in the dark and flash made them turn out icky....will post up here with good pics.

[Mike621]

Looks sharp....give that Razorback a slight twist to level it when you have a chance tho...lol....I took pics of BLRs but it was in the dark and flash made them turn out icky....will post up here with good pics.

[emoji106][emoji109]


Sent from my iPhone using Tapatalk

[LBR]

[emoji106][emoji109]


sent from my iphone using tapatalk

lmao!!!!

[AlfaBaz]

That looks great, Mike. I looked at mine as I walked by today............

[Ed Harvey]

Put insurance on mine with so many burning up lately got me spooked and put the ext and mount to.

Sent from my SCH-I535 using Tapatalk

[The Rattler (BLR)]

Rugged radio in and working & razorback technology belt temp sensor in and working
Also all fluids changed and ready for SM..

[Beer Mod]

^^^ oh dang!! That's awesome

[The Rattler (BLR)]

^^^ oh dang!! That's awesome
Now LBR needs to work on his...getting a new clutch..:) in the Ole Rhintax

[LBR]

Now LBR needs to work on his...getting a new clutch..:) in the Ole Rhintax
Yeah, my clutch is worn down a bit

http://images.tapatalk-cdn.com/15/09/29/75a5f61dfd51a87873890ad1621b1e35.jpg

[Yellow Toy]

Getting it cleaned up to sell .

[Mike621]

Put insurance on mine with so many burning up lately got me spooked and put the ext and mount to.

Sent from my SCH-I535 using Tapatalk
definitely worth it Ed, I didn't think I did to much to mine, and they totaled mine. was talking too a guy last weekend that has a 2015 RZR 1000, he said he "wasn't" doing anything to bad , but ended up rolling his machine and causing over $6000 in damage, and he's not insured. so you just never know.

[Ed Harvey]

I'm still sitting around the house waiting to go back to work so I look around on the net one race team lost a pre-runner and the race rzr in the same day due to fire. Somebody lost one 2 days old and 2 burned in glamis. We have been going to put insurance on it but just didn't do it now it full coverage plus 6000 for add ons so anything happens it's covered.

Sent from my SCH-I535 using Tapatalk

[Beach Leo]

Yep always had my RZR fully insured,

Thats why it never did light up

You can bet on it, that if not insured would have lit up a long time ago

I lost on that bet I made

[Ed Harvey]

These things cost a lot then you spend a small fortune getting them the way you want them and if something happens I couldn't replace it so your still making payments on a pile of junk setting in the yard. So I feel better now that it's got insurance on it and hopefully I don't have to use it.

Sent from my SCH-I535 using Tapatalk

[Pipelayer]

Rugged radio installed


Sent from my iPhone using Tapatalk

[Flying Dog]

Getting it serviced , riding time is coming .

[LBR]

Rugged radio installed


Sent from my iPhone using Tapatalk
All done here too, just need to buddy up with my neighbor for a radio check.

[Pipelayer]

All done here too, just need to buddy up with my neighbor for a radio check.

X2 thanks for sending me the link to the programming list.


Sent from my iPhone using Tapatalk

[Ed Harvey]

1062Got my UTV CRAZY skull on the hood today and washed it up I did that 50/50 mix with soap and 303 it worked great. I don't like armoral. That green really pop's with the orange and black.

Sent from my SCH-I535 using Tapatalk

[EPL]

1062Got my UTV CRAZY skull on the hood today and washed it up I did that 50/50 mix with soap and 303 it worked great. I don't like armoral. That green really pop's with the orange and black.

Sent from my SCH-I535 using Tapatalk

Looks good Ed .

[Ed Harvey]

Putting pictures on here is driving me crazy.

Sent from my SCH-I535 using Tapatalk

[EPL]

Putting pictures on here is driving me crazy.

Sent from my SCH-I535 using Tapatalk

With Tapatalk it post the picture as you took it !! So if you have the phone upside down the picture is going to be upside down , if you turn the phone sideways as to take a long picture it will post the picture sideways.

[Ed Harvey]

I made sure it was up when pulled it from the gallery and clipped it to the post it was sideways and i only hit post 1time and that mess came up. Last time 2 upside down and in the gallery they where right side up. So I don't know what the hell is going on.

Sent from my SCH-I535 using Tapatalk

[Beer Mod]

1062Got my UTV CRAZY skull on the hood today and washed it up I did that 50/50 mix with soap and 303 it worked great. I don't like armoral. That green really pop's with the orange and black.

Sent from my SCH-I535 using Tapatalk

That's cool!!

[Beer Mod]

I made sure it was up when pulled it from the gallery and clipped it to the post it was sideways and i only hit post 1time and that mess came up. Last time 2 upside down and in the gallery they where right side up. So I don't know what the hell is going on.

Sent from my SCH-I535 using Tapatalk
Same thing happens to me 1 out of 10 pictures I post. Crazy...

[Turtle Tim]

Changed the timing chain tensioner, re-clutched for Sand Mt, and pulled both clutches out to thoroughly clean while I was at it.

[The Rattler (BLR)]

LBR finally took time to work on his own vehicle...lol..He finally got around to putting his Maverick clutch that he bought over a year ago in the Ole Rhintax...now he can shift...His old clutch was pretty much, no it was garbage...:)

[Yellow Toy]

Been getting my ride ready for winter .

[Flying Dog]

Checked everything over getting ready for a ride this weekend .

[Beer Mod]

Stocking up on parts :)

[Pipelayer]

New wench and maybe some roll cage mods.


Sent from my iPhone using Tapatalk

[EPL]

Ordered parts for the XP1000 !!

[Mike621]

Got my Harness bar, and 4 point belts.


Sent from my iPad using Tapatalk

[RaceBizz]

Took the extra Gerbing heated gear plugs I have for our motorcycles and mounted them in the RZR to extend my riding time. Now the wife will be warm no matter what with the heated gloves and jacket liner. I even put an extra one in for me too. Cause I have to admit the heated gear is really nice.

[Ed Harvey]

I got bored the other day and was cleaning up the work bench I had bunch of old air fitting and came up with this a quick disconnect for a fire stick whip.114511461147

Sent from my SCH-I535 using Tapatalk

[Pipelayer]

Lowered the back of the stock cage by 2.5" and installed a new wench.http://images.tapatalk-cdn.com/15/11/14/49b28c21c9daf44e229e411eef691aae.jpghttp://images.tapatalk-cdn.com/15/11/14/a4b0652082fa1c47c0be9b8266955619.jpg


Sent from my iPhone using Tapatalk

[Mike621]

Installed my Harness bar, and Intrusion bar in the front, tomorrow I will install the 4 point harnesses.

http://images.tapatalk-cdn.com/15/11/14/4c09a2d5302ab4c54374cf3bbf4a8577.jpg

http://images.tapatalk-cdn.com/15/11/14/d9fbcae39994186aff648c563268b8a7.jpg

http://images.tapatalk-cdn.com/15/11/14/a3c379636cd22ce21830c95ed9297a1d.jpg


Sent from my iPhone using Tapatalk

[de3]

1159

Added sport limited door graphics to my sport XT.

[Lennart]

Started putting my windshield and the rest of my cold weather equipment on my Maverick .

[Mike621]

Started putting my windshield and the rest of my cold weather equipment on my Maverick .

[emoji106]🏽


Sent from my iPad using Tapatalk

[Mavmann]

Cleaned my Maverick today after a great weekend of riding .

[RZRJIM]

Cleaning it so I can sell it .

[Ed Harvey]

Just got done with putting the new seats in 11741175

Sent from my SCH-I535 using Tapatalk

[EPL]

I'm working on replacing the front end on Fast Pats ride !!

[Fuzzy]

Just got done with putting the new seats in 11741175

Sent from my SCH-I535 using Tapatalk

What brand are those seats ? I like the looks of them .

[Ed Harvey]

Threshold I got them from Bert's utv they had them at sand sport super show. I saw them online when i was looking at the posts from the show.l called and ordered a set they had a bench seat to. They gave me the show price at the time 399.99$ no telling how much they are now. They are very nice and well made and they feel great I really like them can't wait to go for a ride.

Sent from my SCH-I535 using Tapatalk

[Ed Harvey]

I got bored the other day and was cleaning up the work bench I had bunch of old air fitting and came up with this a quick disconnect for a fire stick whip.114511461147

Sent from my SCH-I535 using Tapatalk
Was a good idea but didn't work it was lose and they flopped around o well you don't know if you don't try and the rear flag mounts bitched to get to.

Sent from my SCH-I535 using Tapatalk

[LBR]

Put another antenna on the Maverick tonight and cinched that mutha down TIGHT!!!!

[johnnycat8]

Put another antenna on the Maverick tonight and cinched that mutha down TIGHT!!!!

did you replace the o ring?

[johnnycat8]

1184

[Beer Mod]

Gave mine a long hard look.....so many plans lol

[LBR]

did you replace the o ring?
Oh yeah, made extra sure they sent an oring with it.

[gridman]

http://images.tapatalk-cdn.com/15/11/21/0dc9278e784bb875c650c1cea528dcf0.jpg
Installed some dirt tires on it


Sent from my iPhone using Tapatalk

[Mike621]

Looks good , I like those tires [emoji106]🏽


Sent from my iPad using Tapatalk

[Pipelayer]

http://images.tapatalk-cdn.com/15/11/21/0dc9278e784bb875c650c1cea528dcf0.jpg
Installed some dirt tires on it


Sent from my iPhone using Tapatalk

You need to to take it out and fling some mud with them Pat


Sent from my iPhone using Tapatalk

[EPL]

You need to to take it out and fling some mud with them Pat


Sent from my iPhone using Tapatalk

But then it would get dirty !! LOL

[Pipelayer]

But then it would get dirty !! LOL

Lol


Sent from my iPhone using Tapatalk

[gridman]

I'm ready lets go, we should get one last Rubicon ride in before the snow is way too deep I could do a weekday trip late next week if anybody want's to go

[Pipelayer]

I'm ready lets go, we should get one last Rubicon ride in before the snow is way too deep I could do a weekday trip late next week if anybody want's to go

Bring it up to the fenders ferry ride this Saturday.


Sent from my iPhone using Tapatalk

[EPL]

I put the windshield on mine today getting ready for Saturdays ride .

[gridman]

Bring it up to the fenders ferry ride this Saturday.


Sent from my iPhone using Tapatalk
Cant do this weekend bro

[Ed Harvey]

I made the lighted a lighted whip today a 6footer. Learned what not to buy for the next one.

Sent from my SCH-I535 using Tapatalk

[Pipelayer]

Maybe next time


Sent from my iPhone using Tapatalk

[Pipelayer]

I put the windshield on mine today getting ready for Saturdays ride .

I think I'm going to put mine back in as well. That Sierra ride got a little chilly.


Sent from my iPhone using Tapatalk

[Ed Harvey]

I put my windshield on for Saturday's ride might be wet and cold.

Sent from my SCH-I535 using Tapatalk

[Maverick4me]

Installed Rugged Radios in both the wife and I's Mavericks. Then installed new custom XC PRP seats! Ready for UTV Takeover!!

[Mike621]

I cut my front window, to fit the Mav front end, and installed some weather stripping on the bottom. Going to install a small piece of glass on the upper part of the rear cage, should be good for the VC ride. http://images.tapatalk-cdn.com/15/12/17/a49f2ed2c88fef99ecbea4d0713471f2.jpghttp://images.tapatalk-cdn.com/15/12/17/6a9d8cbea11c45c263ce345ddf6e59a3.jpg


Sent from my iPhone using Tapatalk

[The Rattler (BLR)]

LBR changed the belt on my Turbo..almost 2000 miles on the stock belt...yippee.. gotta remember to break it in when we get to Ocotillo Wells next week..

[Mike621]

LBR changed the belt on my Turbo..almost 2000 miles on the stock belt...yippee.. gotta remember to break it in when we get to Ocotillo Wells next week..

Good to hear you got that kind of mileage out of the stock belt, was it really wore out, or could you have gotten a little more out of it, have fun on your trip. [emoji106]


Sent from my iPhone using Tapatalk

[The Rattler (BLR)]

Good to hear you got that kind of mileage out of the stock belt, was it really wore out, or could you have gotten a little more out of it, have fun on your trip. [emoji106]


Sent from my iPhone using Tapatalk
I could of gotten some more...
Lance may jump in and say what the new vs old belt mic-ed out at
I'm looking for to having the new belt and able to keep track of the belt temp from the onset.....

[EPL]

Good to hear you got that kind of mileage out of the stock belt, was it really wore out, or could you have gotten a little more out of it, have fun on your trip. [emoji106]


Sent from my iPhone using Tapatalk


I sure hope I get WAAAAAY more miles than that on my Turbo belt !!! So far I have never broke a belt !!

[The Rattler (BLR)]

Sand is what is hard on them...during UTV takeover I think 6 RZR'S blew belts..on one ride

[EPL]

Sand is what is hard on them...during UTV takeover I think 6 RZR'S blew belts..on one ride

I think a lot of it has to do with how people treat them. Also I think leaving the belt cover off in the sand to help keep the belt cool is eating the belts up ,just my opinion !!

[FBT]

Well I guess mine saved me some misery today.
It is in the shop parked for winter, or until I take it to Ben in Feb. I had just slid the garage door down and turned to walk away before the door botttomed out.
I heard a big bang, and went to the floor, I heard a big thump at the left rear tire.
The tubular shaft that runs across the header beam that has the two springs on it failed. Actually, a bearing at the very end of the shaft had seized up. Over a period of years it sawed through the shaft. It finished sawing today. When it cut through it instantly released the spring tension on the failed side, and doubled it on the other. The cable that raises and lowers the door came loose, and whipped across the room like a martial arts device. The thump I heard was the cable smacking the tire. The door wound up with one side on the floor, and the other side 3 inches off the floor. In a genuine bound up tight position.
$300 later it is all fixed.
Glad I had the Rzr parked there.
If this garage door arrangement sounds familiar take a bottle of WD-40 or 3in1 oil and locate those bearings and lubricate them once a year or so. They are at either end of the shaft the springs are on, in a sheet metal bracket that supports the spring shaft assembly, right next to the pulleys the lifting cables run on.
This door assembly is 30 years old, I have never lubed those bearings before.
I won't do that again.

[The Rattler (BLR)]

I think a lot of it has to do with how people treat them. Also I think leaving the belt cover off in the sand to help keep the belt cool is eating the belts up ,just my opinion !!
With the turbo do you have better belt cooling?.. That was one of the big differences in the Mavericks

[The Rattler (BLR)]

Well I guess mine saved me some misery today.
It is in the shop parked for winter, or until I take it to Ben in Feb. I had just slid the garage door down and turned to walk away before the door botttomed out.
I heard a big bang, and went to the floor, I heard a big thump at the left rear tire.
The tubular shaft that runs across the header beam that has the two springs on it failed. Actually, a bearing at the very end of the shaft had seized up. Over a period of years it sawed through the shaft. It finished sawing today. When it cut through it instantly released the spring tension on the failed side, and doubled it on the other. The cable that raises and lowers the door came loose, and whipped across the room like a martial arts device. The thump I heard was the cable smacking the tire. The door wound up with one side on the floor, and the other side 3 inches off the floor. In a genuine bound up tight position.
$300 later it is all fixed.
Glad I had the Rzr parked there.
If this garage door arrangement sounds familiar take a bottle of WD-40 or 3in1 oil and locate those bearings and lubricate them once a year or so. They are at either end of the shaft the springs are on, in a sheet metal bracket that supports the spring shaft assembly, right next to the pulleys the lifting cables run on.
This door assembly is 30 years old, I have never lubed those bearings before.
I won't do that again.
We had that kinda happen to ours but not that bad...we caught it before it sent a flying torpedo

[EPL]

With the turbo do you have better belt cooling?.. That was one of the big differences in the Mavericks

I'm not 100% sure if they made the cooling better ,but they did put a thicker belt on it !!

[Mike621]

I've been letting mine run a little , and rev it up a bit before I turn it off, to cool the clutch down some so the belt isn't stopped on the hot shives.


Sent from my iPhone using Tapatalk

[The Rattler (BLR)]

I've been letting mine run a little , and rev it up a bit before I turn it off, to cool the clutch down some so the belt isn't stopped on the hot shives.


Sent from my iPhone using Tapatalk
Doing 2 things letting the belt and also the turbo cool... I see so many people just shut the machine down especially after a good run...

[Pipelayer]

Tranny bearing upgrade & new clutch.




http://uploads.tapatalk-cdn.com/20160119/6e2eb40b66ee5d57ab6a4eedf46bbee8.jpghttp://uploads.tapatalk-cdn.com/20160119/cee124482c4680252d11d14dfaaa0c27.jpg


Sent from my iPhone using Tapatalk

[LBR]

That's gittin after it...looks like your on a roll now!

[EPL]

Tranny bearing upgrade & new clutch.




http://uploads.tapatalk-cdn.com/20160119/6e2eb40b66ee5d57ab6a4eedf46bbee8.jpghttp://uploads.tapatalk-cdn.com/20160119/cee124482c4680252d11d14dfaaa0c27.jpg


Sent from my iPhone using Tapatalk


Are you doing it yourself Jeff ??

[Pipelayer]

No sir, Ben is doing it,RSR Performance.


Sent from my iPhone using Tapatalk

[5150George]

Tranny bearing upgrade & new clutch.




http://uploads.tapatalk-cdn.com/20160119/6e2eb40b66ee5d57ab6a4eedf46bbee8.jpghttp://uploads.tapatalk-cdn.com/20160119/cee124482c4680252d11d14dfaaa0c27.jpg





Sent from my iPhone using Tapatalk



What are you doing to the trans ?

[Pipelayer]

Upgrading the bearings from the Chinese bearings. Just preventative maintenance on parts that have been known to fail.


Sent from my iPhone using Tapatalk

[Mike621]

Upgrading the bearings from the Chinese bearings. Just preventative maintenance on parts that have been known to fail.


Sent from my iPhone using Tapatalk

[emoji106] good time of the year to get it done. How long is the down time?


Sent from my iPhone using Tapatalk

[gridman]

Good timing Bro, Ben will dial you in

[Pipelayer]

Good timing Bro, Ben will dial you in

Yeah, I like that he takes it out and drives it first to check out what the problem is. He should have my belt issues al straitened out. When I get it back, I'll put a new set of tires on it and I'll be ready for the year.


Sent from my iPhone using Tapatalk

[Desert900]

Just did 27x9x12 Dirt Commanders, a Gates carbon belt (OEM belt is now the spare), Reno Cycles rear rack and the break-in service.

[Pipelayer]

[emoji106] good time of the year to get it done. How long is the down time?


Sent from my iPhone using Tapatalk

Idk, maybe a couple of weeks. Bens squeezing it in between a couple turbo builds.


Sent from my iPhone using Tapatalk

[Beach Leo]

Put proof of insurance in RZR today

may-be I should have Ben install some of those China bearings in my tranny

[LBR]

Put proof of insurance in RZR today

may-be I should have Ben install some of those China bearings in my tranny
You DON'T want the Chinese bearings Leo. When Ben chimes in, he may say your 800 tranny bearing are better than these used lately....thought I heard 800s were better quality bearing and were fine......someone know for sure??

[Pipelayer]

You DON'T want the Chinese bearings Leo. When Ben chimes in, he may say your 800 tranny bearing are better than these used lately....thought I heard 800s were better quality bearing and were fine......someone know for sure??

Lance, from what he told me was that when they move their mfg to Mexico, they started using the cheap bearings. Idk what year it was, but before 2014. The ones made in the states don't have them. Please Chime in Ben if I got it wrong.


Sent from my iPhone using Tapatalk

[EPL]

Lance, from what he told me was that when they move their mfg to Mexico, they started using the cheap bearings. Idk what year it was, but before 2014. The ones made in the states don't have them. Please Chime in Ben if I got it wrong.


Sent from my iPhone using Tapatalk


My 2011 XP 900 had the Chinese bearings !!

[Pipelayer]

I looked it up and it said 2010 they moved their assembly plant to mexico


Sent from my iPhone using Tapatalk

[Millerrg]

They would assemble them there but where are the transmissions made at ?

[Beach Leo]

They try like hell to keep it a secret where all there stuff is made at

They feel if you knew where it is made at that could affect sales

You can pretty much rest assured that it is not made in the usa anymore

[Fuzzy]

They try like hell to keep it a secret where all there stuff is made at

They feel if you knew where it is made at that could affect sales

You can pretty much rest assured that it is not made in the usa anymore

I'm not so sure anything is going to affect Polaris sales .

[Pipelayer]

I'm not so sure anything is going to affect Polaris sales .

Surely not, nor should it. I like mine and wouldn't trade it for anything out there, right now. I plan on keeping it for a long time and believe that doing this is going to make my car more reliable, given the remote places that we go. When the trans case gets blown apart, it locks everything up and makes it very difficult to retrieve the car. It also means a new trans at 2600.00. I was told that there have been 8 cars in this area that this has happened to. Right or wrong, I needed to have this work done for my own piece of mind


Sent from my iPhone using Tapatalk

[Beach Leo]

Well I don't know what I have been told, but something must be affecting there sales

There stock took a shit, about 50% down the last few months was $155 in June Now around $80

Sales are falling just like there stock is what we see

[gridman]

I got a call from one of my buddies today, stuck out in the beautiful Oregon dunes another big hole in the tranny anybody that was one of these junkers needs to change these POS things out

[EPL]

Well I don't know what I have been told, but something must be affecting there sales

There stock took a shit, about 50% down the last few months was $155 in June Now around $80

Sales are falling just like there stock is what we see

I have Mc Donald's that my mother in law gave my kids . As bad as everything you see that Mc Donald's is going down, the stock keeps going up !! I think Polaris will be the same !! There still isn't anyone out there to compete with them !!

[EPL]

I got a call from one of my buddies today, stuck out in the beautiful Oregon dunes another big hole in the tranny anybody that was one of these junkers needs to change these POS things out

There are people that have no idea and never seen this problem with the trans , I'm here to tell you it is true from my own experience !!! My XP 900 went bad but I was lucky and got it before it distroyed my trans. I'm getting ready to do my Xp1000 and XP Turbo , better save them sorry !!

[Pipelayer]

They must be selling them because the local dealer in my area just doubled in size and has a new showroom.


Sent from my iPhone using Tapatalk

[lainracing]

http://uploads.tapatalk-cdn.com/20160123/ca03fe1c3b825b4014a3ace5782f98a3.jpghttp://uploads.tapatalk-cdn.com/20160123/3ef66dc458a71a2cea15c1ecbd943c88.jpg installed new Polaris side mirrors bought a spare belt and order tender springs for the rear shocks.


Sent from my iPhone using Tapatalk

[Airbus899]

http://uploads.tapatalk-cdn.com/20160124/db472d013008f244b7efd11b0123c193.jpg
Getting her tore down to send suspension out for powder coat. http://uploads.tapatalk-cdn.com/20160124/1570a26193d7010a3317cf570c9441d6.jpgReplacing a few plastic body parts scratched up then putting her up for sale http://uploads.tapatalk-cdn.com/20160124/7833bff66e09477265d8df596db91c0f.jpg also rebuilding the Primary & Secondary. Whoever buys it when I'm done will have a ready to go bad ass RZR!


Sent from my iPhone using Tapatalk

[Desert900]

There are people that have no idea and never seen this problem with the trans , I'm here to tell you it is true from my own experience !!! My XP 900 went bad but I was lucky and got it before it distroyed my trans. I'm getting ready to do my Xp1000 and XP Turbo , better save them sorry !!

So, this is something I should plan on doing (sooner or later) with my Trail? Which trans oil are you guys using?

[Turnheadz]

Spent hours cleaning it .

[LBR]

Walked by it today and kicked a tire....dirt and dust settled to the shop floor.

[Pipelayer]

So, this is something I should plan on doing (sooner or later) with my Trail? Which trans oil are you guys using?

I use Polaris AGL.


Sent from my iPhone using Tapatalk

[EPL]

i use polaris agl.


Sent from my iphone using tapatalk

x2 !!

[Desert900]

Thanks. That's what I'm using. Just did the break-in service a few days ago. Alba Racing recommends it along with Polaris Demand Drive fluid, but they don't like Polaris engine oil. They use, recommend and have seasons of desert racing success with Maxima SynBlend 4 10W-40. I used that in a bike I used to have and my son sold a lot of it when he owned a bike shop in Roseville, CA, so that's what I'm going to use in mine. Amsoil seems to be at the top of the oil heap, but I think doing shorter oil change intervals than Polaris recommends eliminates the need for a full synthetic.

Getting back to the bearing issue...I plan to do an occasional oil analysis on engine oil and wonder if it would be a good idea doing an occasional analysis on the the trans/diff oil for an early warning for impending bearing failure? Might be worth a call to Blackstone Labs for their opinion.

In keeping with the thread subject, my UTV Inc. fire extinguisher quick release bracket and extinguisher just shipped. Arrives tomorrow.

[Mike621]

Installed front Gussets kit, can't really see it but it's in there. http://uploads.tapatalk-cdn.com/20160127/e79bd7873745a3c01a8dc950e9c2b748.jpg


Sent from my iPhone using Tapatalk

[EPL]

I got my Roto Pax mounted and the fire extinguisher quick release bracket on the XP Turbo !!

[Bedo]

Installed front Gussets kit, can't really see it but it's in there. http://uploads.tapatalk-cdn.com/20160127/e79bd7873745a3c01a8dc950e9c2b748.jpg


Sent from my iPhone using Tapatalk

What tires are these ?

[The Rattler (BLR)]

Installed front Gussets kit, can't really see it but it's in there. http://uploads.tapatalk-cdn.com/20160127/e79bd7873745a3c01a8dc950e9c2b748.jpg


Sent from my iPhone using Tapatalk
WTH...I guess I been lucky...after the crap that Jim and Melissa put me through I can handle anything now...lol..

[Mike621]

What tires are these ?

Kanati Mongrel


Sent from my iPhone using Tapatalk

[Pipelayer]

New wheels came yesterdayhttp://uploads.tapatalk-cdn.com/20160127/15db198c9ddb23c598f084123f44c297.jpg


Sent from my iPhone using Tapatalk

[Mike621]

New wheels came yesterdayhttp://uploads.tapatalk-cdn.com/20160127/15db198c9ddb23c598f084123f44c297.jpg


Sent from my iPhone using Tapatalk

Nice those are going to look BA$$ [emoji106]🏽 15"?

[Pipelayer]

Nice those are going to look BA$$ [emoji106]🏽 15"?

No they're 14". I already had 15's but they only make the crawlers in 14".


Sent from my iPhone using Tapatalk

[EPL]

New wheels came yesterdayhttp://uploads.tapatalk-cdn.com/20160127/15db198c9ddb23c598f084123f44c297.jpg


Sent from my iPhone using Tapatalk

Received my wheels today , mount them up tomorrow and i'll be ready to go on our March Madness ride !!

[Bedo]

Put some new tires on !

[KNB]

I washed mine, that's about as far as I've got lately, I'm getting ready to do a clutch and tires

[LBR]

Today is diagnosing engine damage day for me.....hurt it during our Ocotillo Wells trip and not sure what is up with it.

[Millerrg]

Checking it over getting ready for a ride tomorrow .

[EPL]

Just finished cleaning it from last weekends ride !!

[KNB]

Just finished cleaning it from last weekends ride !!

I don't know about you but I brought home a lot of mud from last weekend

[EPL]

I don't know about you but I brought home a lot of mud from last weekend

I have my fair share of it here !!

[Pipelayer]

Today is diagnosing engine damage day for me.....hurt it during our Ocotillo Wells trip and not sure what is up with it.

I hope you find minimal damage, Lance [emoji383]


Sent from my iPhone using Tapatalk

[EPL]

I hope you find minimal damage, Lance [emoji383]


Sent from my iPhone using Tapatalk


He may end up driving a "Canned Ham" on vacation !! LOL

[Pipelayer]

He may end up driving a "Canned Ham" on vacation !! LOL

You know, that may ruin the mans vacation.... What a shame[emoji22][emoji22][emoji22]

On a happier note, I went to Ben's Yesterday


.

( RSR Performance) and picked up my car. Trans bearing up grade and new Clutch. I don't think this thing has ever been this smooth taking off from a start. But when I got home I had a new set of Crawlers for it.http://uploads.tapatalk-cdn.com/20160131/6a6e67a4c6c2cf4c275caad1290378e6.jpghttp://uploads.tapatalk-cdn.com/20160131/f9d08a52f6d2ef7ebe4460ad17da45c3.jpg


Sent from my iPhone using Tapatalk

[EPL]

Glad everything worked good from Ben !! Tires look great !!

[lainracing]

New grill from assaultutv http://uploads.tapatalk-cdn.com/20160204/c99669fea6b1b3948017d2d0612e2d07.jpg


Sent from my iPhone using Tapatalk

[KNB]

Nice grill Bob

[EPL]

Nice grill Bob

And he got his color !!

[lainracing]

Thanks high clearance raidous rods are nexthttp://uploads.tapatalk-cdn.com/20160204/6329d37788c6c8c22f0a6aeb52efc8d8.jpg


Sent from my iPhone using Tapatalk

[Pipelayer]

Sweet, you'll like having them and those will look great.


Sent from my iPhone using Tapatalk

[lainracing]

Thanks Jeff also looking at the lower arms as well


Sent from my iPhone using Tapatalk

[lainracing]

New radius rods not the color I wanted but no biggy. Bought from sidexside visons


Sent from my iPhone using Tapatalkhttp://uploads.tapatalk-cdn.com/20160213/b01c4aca4023dbb521b831c5a81bdc5a.jpg

[lainracing]

New wheels and tires will be hear next week


Sent from my iPhone using Tapatalk

[Desert900]

Removed my front sway bar prior to the Johnson Lane ride. Made a noticable difference. Bottomed the front shocks a couple of times, so Bandit Series 46 are next.

[lainracing]

zbros radius rods are on




http://uploads.tapatalk-cdn.com/20160214/081806ced3140ae06e4544551480d966.jpg


Sent from my iPhone using Tapatalk

[EPL]

They look good !!

[lainracing]

Think I'm going to order the lower zbros max clearance arms too


Sent from my iPhone using Tapatalk

[Mike621]

Installed my new spare tire mounting rack, was hoping to test it before March Madness ride, but the weekends are getting slim. http://uploads.tapatalk-cdn.com/20160217/89ca04c81d73259ffc33913cf2289fa2.jpghttp://uploads.tapatalk-cdn.com/20160217/ea0a12f286fab07b44029add14f43300.jpg


Sent from my iPhone using Tapatalk

[EPL]

Installed my new spare tire mounting rack, was hoping to test it before March Madness ride, but the weekends are getting slim. http://uploads.tapatalk-cdn.com/20160217/89ca04c81d73259ffc33913cf2289fa2.jpghttp://uploads.tapatalk-cdn.com/20160217/ea0a12f286fab07b44029add14f43300.jpg


Sent from my iPhone using Tapatalk

I like that mount !! Just wish your spare would fit my RZR !! LOL

[KNB]

Installed my new spare tire mounting rack, was hoping to test it before March Madness ride, but the weekends are getting slim. http://uploads.tapatalk-cdn.com/20160217/89ca04c81d73259ffc33913cf2289fa2.jpghttp://uploads.tapatalk-cdn.com/20160217/ea0a12f286fab07b44029add14f43300.jpg


Sent from my iPhone using Tapatalk

That's nice, where did you find it?

[Mike621]

I like that mount !! Just wish your spare would fit my RZR !! LOL

[emoji6] [emoji106]


Sent from my iPhone using Tapatalk

[lainracing]

http://uploads.tapatalk-cdn.com/20160217/f5caa5a75f1984b386a01e48a5fc643e.jpghttp://uploads.tapatalk-cdn.com/20160217/bc9dfd43a7c79739461a0bb9e0361145.jpghttp://uploads.tapatalk-cdn.com/20160217/5931724c89d9badde1c7470fb447893f.jpg got the new wheels and tires on tonight


Sent from my iPhone using Tapatalk

[Mike621]

That's nice, where did you find it?

I got it off eBay


Sent from my iPhone using Tapatalk

[Sandfreak]

I got it off eBay


Sent from my iPhone using Tapatalk
What CanAm bags you using?

[Mike621]

What CanAm bags you using?

Their soft bag, they have hard plastic liners and locks on the bottom that match the bed, I got it when I bought it, it was like 200 bucks.


Sent from my iPhone using Tapatalk

[Pipelayer]

http://uploads.tapatalk-cdn.com/20160217/f5caa5a75f1984b386a01e48a5fc643e.jpghttp://uploads.tapatalk-cdn.com/20160217/bc9dfd43a7c79739461a0bb9e0361145.jpghttp://uploads.tapatalk-cdn.com/20160217/5931724c89d9badde1c7470fb447893f.jpg got the new wheels and tires on tonight


Sent from my iPhone using Tapatalk

Bob, you're going to love those tires. I was able to try mine for the first time last weekend. They work really well in all conditions. They look great with those black beadlocks. [emoji106]


Sent from my iPhone using Tapatalk

[lainracing]

Thanks Jeff going to try them out this weekend


Sent from my iPhone using Tapatalk

[EPL]

They look good Bob !! I second the fact that you will like them !!

[neil11975]

Just bought a set of the Polaris 6 point retractable harnesses from a guy on the rzr forum


Sent from my iPad using Tapatalk

[EPL]

Just bought a set of the Polaris 6 point retractable harnesses from a guy on the rzr forum


Sent from my iPad using Tapatalk

Your going to like the seat belts Neil !!

[neil11975]

Thanks. I think I will too. Now I just need to figure out how to mount them in my 4 seater. I might need to fab up a bracket for then to mount to.

Sent from my SM-G900V using Tapatalk

[EPL]

Thanks. I think I will too. Now I just need to figure out how to mount them in my 4 seater. I might need to fab up a bracket for then to mount to.

Sent from my SM-G900V using Tapatalk

One thing you need to do when you make mounting brackets is to make sure that the top of the belt where it comes out of the plastic is below the top of the cross tube !!

[neil11975]

Ok. What is the reason for this?

Sent from my SM-G900V using Tapatalk

[EPL]

The belts are made to pull up and go over the tube ,if you have top edge above the tube the belt rubs on the plastic and doesn't operate smoothly. You hold it in your hand see what I'm talking about.

[neil11975]

Ok thanks for the heads up

Sent from my SM-G900V using Tapatalk

[Sandfreak]

Got a few things done on the new XDS . Got my FUTV skids installed, along with DIY front inner fender screens, Rugged intercom and radio, belt temp guage, DFR doors evo harness and mounts, Alba stage III ecu flash, Genright 500 lumen reverse lights and Racer Tech clean air intake. Hopefully I will get the winch installed this week, wire the dual wips, install the cat delete and exhaust.
Taking the clutches up to Roseburg Monday to have a custom Airdam clutch kit installed and the cage to Medford in a week to have intrusion bars welded in and re powder coat. Hopefully will get the shocks sent off before to long. Starting to see light at the end of the tunnel
Maybe I will get to drive it before Summer. LOL...

[LBR]

Got a few things done on the new XDS . Got my FUTV skids installed, along with DIY front inner fender screens, Rugged intercom and radio, belt temp guage, DFR doors evo harness and mounts, Alba stage III ecu flash, Genright 500 lumen reverse lights and Racer Tech clean air intake. Hopefully I will get the winch installed this week, wire the dual wips, install the cat delete and exhaust.
Taking the clutches up to Roseburg Monday to have a custom Airdam clutch kit installed and the cage to Medford in a week to have intrusion bars welded in and re powder coat. Hopefully will get the shocks sent off before to long. Starting to see light at the end of the tunnel
Maybe I will get to drive it before Summer. LOL...
You've been busy as of late Don....awesome list of goodies!

[Sandfreak]

One more pic.

[Airbus899]

Helping a buddy install this bad boy!![emoji100]http://uploads.tapatalk-cdn.com/20160219/594d529e98904c6f23ff8b4bf16f5fb8.jpghttp://uploads.tapatalk-cdn.com/20160219/9412227f40cb8b316f833ddb7bc66bb4.jpg


Sent from my iPhone using Tapatalk

[Bedo]

Got a few things done on the new XDS . Got my FUTV skids installed, along with DIY front inner fender screens, Rugged intercom and radio, belt temp guage, DFR doors evo harness and mounts, Alba stage III ecu flash, Genright 500 lumen reverse lights and Racer Tech clean air intake. Hopefully I will get the winch installed this week, wire the dual wips, install the cat delete and exhaust.
Taking the clutches up to Roseburg Monday to have a custom Airdam clutch kit installed and the cage to Medford in a week to have intrusion bars welded in and re powder coat. Hopefully will get the shocks sent off before to long. Starting to see light at the end of the tunnel
Maybe I will get to drive it before Summer. LOL...

Looks great .

[Bedo]

Helping a buddy install this bad boy!![emoji100]http://uploads.tapatalk-cdn.com/20160219/594d529e98904c6f23ff8b4bf16f5fb8.jpghttp://uploads.tapatalk-cdn.com/20160219/9412227f40cb8b316f833ddb7bc66bb4.jpg


Sent from my iPhone using Tapatalk

Turbo ?

[Airbus899]

Yup. Turbo Z1 265hp


Sent from my iPhone using Tapatalk

[Bedo]

Cool !

[motosx]

new clutch setup for xpt after stock primary wore awayhttp://uploads.tapatalk-cdn.com/20160219/61f741173c163ef27a490c09343d2506.jpg

stock primary wear groveshttp://uploads.tapatalk-cdn.com/20160219/4be224728f922c9df4b22631bb10e632.jpg

[crazywatson]

new clutch setup for xpt after stock primary wore awayhttp://uploads.tapatalk-cdn.com/20160219/61f741173c163ef27a490c09343d2506.jpg

stock primary wear groveshttp://uploads.tapatalk-cdn.com/20160219/4be224728f922c9df4b22631bb10e632.jpg
There is a company making a hard steel shim/plate/bracket thing that goes in there to keep that from happening. Airdam is making one too that is almost ready to sell. This has been a huge problem for racers. The clutches are on back order also.

Sent from my SM-N920V using Tapatalk

[motosx]

steve , I got a set of the inserts but had trip planned before they arrived.

[crazywatson]

Cool you can have too many clutch parts. Ed you should buy these inserts too.

Sent from my SM-N920V using Tapatalk

[EPL]

Cool you can to Omani clutch parts. Ed you should buy these inserts too.

Sent from my SM-N920V using Tapatalk

Something else to spend money on !! Do you have more information on them ??

[So Cal Sam]

steve , I got a set of the inserts but had trip planned before they arrived.

Do you have more information on the clutch shims ?

[crazywatson]

3p Pit Performance in texas makes some and Airdam Clutches is supposed to have something.

Sent from my SM-N920V using Tapatalk

[motosx]

Something else to spend money on !! Do you have more information on them ??

XPT Clutch problem
http://www.rzrforums.net/showthread.php?t=190761

[Desert900]

Installed Bandit 46 Series shocks on the Trail. 2" more ground clearance and a ride that feels like there are actually shock absorbers installed. Really highlights how bad the stock Sachs are on the Trail model.

[Pipelayer]

Changed motor oil and filter, air filter, front diff oil and ordered the isota cargo box.


Sent from my iPhone using Tapatalk

[Airbus899]

Powder Coated all Suspension. http://uploads.tapatalk-cdn.com/20160221/aa0aa6e5d9c99f98cb61397baf8fc286.jpg
Pulled off stickers and Fully detailed herhttp://uploads.tapatalk-cdn.com/20160221/f06666fcdaef9eb6d5aac7806a8b9b1f.jpg


Sent from my iPhone using Tapatalk

[EPL]

I tried my wheel spacers just to make sure the Hyper wheels will clear the brake calipers on the XPT !!

[drtfun]

Tried to mount these 30x11x14 1619 on these
with no freaking luck any trick or know a good shop that wont damage the wheels? :mad:

[Pipelayer]

I tried my wheel spacers just to make sure the Hyper wheels will clear the brake calipers on the XPT !!

Did it work?


Sent from my iPhone using Tapatalk

[EPL]

Tried to mount these 30x11x14 1619 on these
with no freaking luck any trick or know a good shop that wont damage the wheels? :mad:

Those should be no problem to mount !!

[EPL]

Did it work?


Sent from my iPhone using Tapatalk

Yes , I think i only needed about 1/2" to make them clear but got 1 1/2" spacers . They are only for the sand tires so the extra 1" is good !!

[drtfun]

Ed cant get the tire bead to sit in that little groove, get it almost on and the darn thing pops out somewhere else so have start over
Will try again but might let tire sit in sun to see if it will be more flexible

[Pipelayer]

Great. It shouldn't. Effect your handling too much in the sand.


Sent from my iPhone using Tapatalk

[EPL]

Great. It shouldn't. Effect your handling too much in the sand.


Sent from my iPhone using Tapatalk

It should help in the sand !!

[Scrat]

Tried to mount these 30x11x14 1619 on these
with no freaking luck any trick or know a good shop that wont damage the wheels? :mad:

NICE looking wheels !

[drtfun]

This groove/lip is what I am talking about

[EPL]

This groove/lip is what I am talking about

Each time I have mount my tires on beadlocks the tire sat down on the lip !! What is the problem ?, Is the tire to large and falls off the lip or to small to fit on the lip ?

[Pipelayer]

This groove/lip is what I am talking about

Hard for me to see, but mine set on top of the lip and the ring compresses the bead against it. Can't tell with the pics.


Sent from my iPhone using Tapatalk

[drtfun]

The bead sits in that litle step down area and when I get all the way around to just 3 bolt hole are left to force the bead over it pops up somewhere else.
I have it set on a bucket with my knees holding the tire in place so it wont pop up somewhere and I just cant force it over and into that lip/groove area.
have gloves on cuse the tire is so damn slick with lube you cant hold it bare handed. will get some beter pics tonight when I try again

[Pipelayer]

Got cha, I haven't had that problem before. Have you tried putting in a few of the bolts with flat washers to hold the opposite side down until you get the last side over the step down?


Sent from my iPhone using Tapatalk

[drtfun]

Got cha, I haven't had that problem before. Have you tried putting in a few of the bolts with flat washers to hold the opposite side down until you get the last side over the step down?
Yep still didnt help
so called Tim at extreme tire where I bought the tires he said to sand a small bevel on the inside of the bead to help it slide over the lip
so will see

[Pipelayer]

Yep still didnt help so called Tim at extreme tire where I bought the tires he said to sand a small bevel on the inside of the bead to help it slide over the lip
so will see

Cool, good luck with it Terry.


Sent from my iPhone using Tapatalk

[EPL]

Yep still didnt help
so called Tim at extreme tire where I bought the tires he said to sand a small bevel on the inside of the bead to help it slide over the lip
so will see

Let us know how it works !!

[drtfun]

got it, this is the stupid lip
1625
Tim said to bevel inner edge pics fuzzy but maybe you can see
1626

Tadahh
1627

[Pipelayer]

Nice looking wheels Terry.


Sent from my iPhone using Tapatalk

[Pipelayer]

got it, this is the stupid lip
1625
Tim said to bevel inner edge pics fuzzy but maybe you can see
1626

Tadahh
1627

[emoji122][emoji112][emoji122][emoji112][emoji122][emoji112]


Sent from my iPhone using Tapatalk