What have you done to your UTV Today .

[Pipelayer]

Hi , finally exhaust that doesn't blow in the ground great job!

Sent from my SM-T580 using Tapatalk

Right? Got tired of making a dust cloud without moving. Thanks


Sent from my iPhone using Tapatalk

[Bedo]

Hi , finally exhaust that doesn't blow in the ground great job!

Sent from my SM-T580 using Tapatalk

That exhaust tip is a good idea .

[EPL]

Almost ready to load up to go to the March Madness ride !!

[Kbachell]

Where's the best place to order a transmission bearing/seal kit, 12% Low Gear Set, and Double Reverse Chain Conversion for the transmission in my 2014 RZR 1000xp? I'm getting ready to order in the next week or so...

[Pipelayer]

Where's the best place to order a transmission bearing/seal kit, 12% Low Gear Set, and Double Reverse Chain Conversion for the transmission in my 2014 RZR 1000xp? I'm getting ready to order in the next week or so...

Hey Ken, I got mine at Hdextremeoffroad.com is where I got mine, I think it was 550.00, I think the double row reverse chain was like 850.00. Give them a try.


Sent from my iPhone using Tapatalk

[Kbachell]

Thanks Jeff! I'll check them out. My wife's a little irritated with you... I told her you talked me into this... lol

[Pipelayer]

Thanks Jeff! I'll check them out. My wife's a little irritated with you... I told her you talked me into this... lol

I’ve been told that I’m a bad influence before....


Sent from my iPhone using Tapatalk

[Pipelayer]

Thanks Jeff! I'll check them out. My wife's a little irritated with you... I told her you talked me into this... lol

Hey Ken, we’re going riding on Sunday if you want to come up, you can drive mine and see if you like it before you do yours.


Sent from my iPhone using Tapatalk

[neil11975]

Where's the best place to order a transmission bearing/seal kit, 12% Low Gear Set, and Double Reverse Chain Conversion for the transmission in my 2014 RZR 1000xp? I'm getting ready to order in the next week or so...Check out RZRWorks. They have some pretty cool options. If my rzr was a little newer then they sell a low range only reduction that leaves your high range alone.

Sent from my SM-G930V using Tapatalk

[Kbachell]

I appreciate the offer, Jeff. Just got home from a trail ride, today and have plenty of things that I have to do tomorrow. Mathematically, my tires have me up 10%, so knocking back down 12% should get me back where I want to be. I think 25% is more than I want to jump to maintain a reasonable pace on those desert runs.

[Pipelayer]

I don’t think I would go any lower than I did.


Sent from my iPhone using Tapatalk

[Mike621]

Just got done installing my new 1/2” Factory UTV Skid Plates, so much better than the flimsy stock ones, had a couple of holes in the stock ones in not good location , these should hold up a lot better crawling through the tight canyons. [emoji1417]
https://uploads.tapatalk-cdn.com/20180403/6fcf4ee4d967cbf0a68b270a57fbc6c6.jpg

As a bonus it came with a front skid. [emoji1417]

[Ed & Charlene]

installed a pair of sub woofers
2715

[stetson]

installed a pair of sub woofers
2715

:cool:

[Jeepalive]

Not today but last Sunday I did this.
Guess 45mph in whoops was to much for the Polaris high clearance radius rods!

https://uploads.tapatalk-cdn.com/20180429/bbe94030dd2bfe7a8c828d18597379f1.jpg

https://uploads.tapatalk-cdn.com/20180429/cc2ac393840d68de3df392e36505e5d0.jpg

[Mike621]

That suck Scott, hope you get it fixed up soon, 45 doesn’t seem to hard to push the Polaris, need to get some beefier arms. [emoji1417]

[Jeepalive]

That suck Scott, hope you get it fixed up soon, 45 doesn’t seem to hard to push the Polaris, need to get some beefier arms. [emoji1417]

That’s what I’m thinking because 45 isn’t that much.
I’m just waiting on price for the bottom shock bolt mount and then we will get going on repairing it. Shouldn’t be down to long

[EPL]

Not today but last Sunday I did this.
Guess 45mph in whoops was to much for the Polaris high clearance radius rods!

https://uploads.tapatalk-cdn.com/20180429/bbe94030dd2bfe7a8c828d18597379f1.jpg

https://uploads.tapatalk-cdn.com/20180429/cc2ac393840d68de3df392e36505e5d0.jpg

Not good !!

[Mike621]

My new shoes showed up today [emoji1417].
https://uploads.tapatalk-cdn.com/20180501/b6a156d92863d80028317a8fa89ac25a.jpghttps://uploads.tapatalk-cdn.com/20180501/49a78006e226076c931aa561bfab286d.jpg

[EPL]

My new shoes showed up today [emoji1417].
https://uploads.tapatalk-cdn.com/20180501/b6a156d92863d80028317a8fa89ac25a.jpghttps://uploads.tapatalk-cdn.com/20180501/49a78006e226076c931aa561bfab286d.jpg


Looks good !!

[drtfun]

Nice!

[Maverick4me]

Got my new Hunter seat installed in my RZR RS1.

2798

[EPL]

nice looking seat !!

[Pipelayer]

Does it have air ride


Sent from my iPhone using Tapatalk

[Maverick4me]

Uses all factory hardware, no adapter plate so it stays a true suspension seat.

[Jeepalive]

Installed a new empire fuel rail and fuel line!
Let’s hope this takes the worries of fire away.

https://uploads.tapatalk-cdn.com/20180715/6280683ac52875cce67abbd77d4511be.jpg

[lainracing]

I bought the one Ed had and he helped me install it .now to find some time to go riding


Sent from my iPhone using Tapatalk

[Kbachell]

I bought a new Empire fuel rail right after I saw the "failed Shasta-Chappie pre-ride" fire, but I finally installed it tonight. The only thing that threw me for a loop was a quick connect fitting installed in the rail that I didn't need for the installation, so I thought I was missing something in my kit. Once I removed the fitting everything installed rather quickly.

[EPL]

I bought a new Empire fuel rail right after I saw the "failed Shasta-Chappie pre-ride" fire, but I finally installed it tonight. The only thing that threw me for a loop was a quick connect fitting installed in the rail that I didn't need for the installation, so I thought I was missing something in my kit. Once I removed the fitting everything installed rather quickly.

I think the quick connect on the fuel rail is for the people that just replace the fuel rail and use the stock fuel line !!

[Kbachell]

I think the quick connect on the fuel rail is for the people that just replace the fuel rail and use the stock fuel line !!

Ahhh... that makes sense. I thought maybe someone returned it with the extra fitting installed... then I realized that the fitting at the end of the braided steel line was 1/8" pipe and so was the quick connect fitting. The whole installation took about 40 minutes, but I spent 10 minutes thinking I had lost part of the kit...

[Mike621]

Got my Rugged Radio Pumper Kit installed today. [emoji1417] didn’t really have anywhere good to mount the controller , so I made a panel on top of my cage makes it easy to get to while driving and does something with that space up there. https://uploads.tapatalk-cdn.com/20181205/e2cc722cce3eb30b278607eb3505c48a.jpghttps://uploads.tapatalk-cdn.com/20181205/3891c2c48c95278baf3300193d507dad.jpghttps://uploads.tapatalk-cdn.com/20181205/373748d6266e95c417424a5b1eaaf67d.jpg

[neil11975]

Got my Rugged Radio Pumper Kit installed today. [emoji1417] didn’t really have anywhere good to mount the controller , so I made a panel on top of my cage makes it easy to get to while driving and does something with that space up there. https://uploads.tapatalk-cdn.com/20181205/e2cc722cce3eb30b278607eb3505c48a.jpghttps://uploads.tapatalk-cdn.com/20181205/3891c2c48c95278baf3300193d507dad.jpghttps://uploads.tapatalk-cdn.com/20181205/373748d6266e95c417424a5b1eaaf67d.jpgLooks good Mike. Did you wire yours through a switch on the dash or just use the variable controller to turn it off and on?

Sent from my SM-T550 using Tapatalk

[Mike621]

Looks good Mike. Did you wire yours through a switch on the dash or just use the variable controller to turn it off and on?

Sent from my SM-T550 using Tapatalk

Just use the controller, it has a switch on it, I did wire it into my fuse panel that goes off when I turn the car off, I would forget it’s on and drain the battery lol.

[Sweet34]

I have the RR pumper system and it is sweet !

[neil11975]

I made my own mounting brackets for the pumper. $12 in parts and about an hour worth of work. https://uploads.tapatalk-cdn.com/20181218/575ce459d7b8fa5067dc08c344cae47d.jpghttps://uploads.tapatalk-cdn.com/20181218/02b790f7c079de6cbcbb5e559164e366.jpg

Sent from my SM-G965U using Tapatalk

[Mike621]

I moved my fan motor to a better place, now I can’t even see it lol
https://uploads.tapatalk-cdn.com/20181218/60e6723d485241e9550d237d942996e9.jpghttps://uploads.tapatalk-cdn.com/20181218/3837eaede4c0eea2146b5b002ffa55bd.jpg

[neil11975]

I moved my fan motor to a better place, now I can’t even see it lol
https://uploads.tapatalk-cdn.com/20181218/60e6723d485241e9550d237d942996e9.jpghttps://uploads.tapatalk-cdn.com/20181218/3837eaede4c0eea2146b5b002ffa55bd.jpgThat looks way better Mike. Mine will be in between my seats attached to the rear passenger grab bar

Sent from my SM-T550 using Tapatalk

[EPL]

I made my own mounting brackets for the pumper. $12 in parts and about an hour worth of work. https://uploads.tapatalk-cdn.com/20181218/575ce459d7b8fa5067dc08c344cae47d.jpghttps://uploads.tapatalk-cdn.com/20181218/02b790f7c079de6cbcbb5e559164e366.jpg

Sent from my SM-G965U using Tapatalk

Looks good !!

[Yellow Toy]

I moved my fan motor to a better place, now I can’t even see it lol
https://uploads.tapatalk-cdn.com/20181218/60e6723d485241e9550d237d942996e9.jpghttps://uploads.tapatalk-cdn.com/20181218/3837eaede4c0eea2146b5b002ffa55bd.jpg


I like the new spot .

[EPL]

Installed my front camara !!


.

[Pipelayer]

Is that for a go pro?


Sent from my iPhone using Tapatalk

[Mike621]

Installed my front camara !!


.

That’s cool Ed , but I thought the Turbo S had a front/ rear camera?

[EPL]

Is that for a go pro?


Sent from my iPhone using Tapatalk

No it shows on the screen in the dash , I'm not sure if I can record from it or not !!

[EPL]

That’s cool Ed , but I thought the Turbo S had a front/ rear camera?

The come with the rear camera and are all set up for the front camera but you have to purchase the front one separate !!

[Pipelayer]

No it shows on the screen in the dash !!

So now you don’t have to be able to see over the dash.


Sent from my iPhone using Tapatalk

[EPL]

So now you don’t have to be able to see over the dash.


Sent from my iPhone using Tapatalk

I wouldn't go as far as saying that but it might be kind of neat when out rock crawling because you can see what is right in front of your tires !!

[Scrat]

So now you don’t have to be able to see over the dash.


Sent from my iPhone using Tapatalk


I don't think I would want to drive just using the front camera .

[EPL]

Nothing on mine today but helped a friend chop his cage !!

[Lenmann]

Nothing on mine today but helped a friend chop his cage !!

Didn't happen without pics!

[EPL]

Didn't happen without pics!Here's a picture !!https://uploads.tapatalk-cdn.com/20181231/31f94ab476d16ebdd724699ba8878d74.jpg

Sent from my SM-G950U using Tapatalk

[Pipelayer]

How much did you lower it


Sent from my iPhone using Tapatalk

[EPL]

How much did you lower it


Sent from my iPhone using Tapatalk


I took 5" out of the rear !!

[Pipelayer]

Looks good


Sent from my iPhone using Tapatalk

[Mike621]

https://uploads.tapatalk-cdn.com/20190101/7a8f225f8e2c69cf7f5d55133e3ec7a6.jpghttps://uploads.tapatalk-cdn.com/20190101/451ab214955ba1b8ef019a4461813516.jpghttps://uploads.tapatalk-cdn.com/20190101/083c3da3cef6955def0ff2cc07f57fc1.jpghttps://uploads.tapatalk-cdn.com/20190101/0def67738194278a579ac0d5a37abdde.jpg

Fabed up a rear bumper for the Yamaha. [emoji482]

[Pipelayer]

Looks good Mike, nice job[emoji106]


Sent from my iPhone using Tapatalk

[Mike621]

Looks good Mike, nice job[emoji106]


Sent from my iPhone using Tapatalk

Thanks Jeff, I like it. [emoji1417]

[lainracing]

Looks good mike


Sent from my iPhone using Tapatalk

[lainracing]

Ed how long did it take you to cut down don’s cage?


Sent from my iPhone using Tapatalk

[EPL]

Thanks Jeff, I like it. [emoji1417]Probably around 5 hours of work time!!

Sent from my SM-G950U using Tapatalk

[EPL]

https://uploads.tapatalk-cdn.com/20190101/7a8f225f8e2c69cf7f5d55133e3ec7a6.jpghttps://uploads.tapatalk-cdn.com/20190101/451ab214955ba1b8ef019a4461813516.jpghttps://uploads.tapatalk-cdn.com/20190101/083c3da3cef6955def0ff2cc07f57fc1.jpghttps://uploads.tapatalk-cdn.com/20190101/0def67738194278a579ac0d5a37abdde.jpg

Fabed up a rear bumper for the Yamaha. [emoji482]Looks good Mike!!

Sent from my SM-G950U using Tapatalk

[EPL]

I'm doing some deep cleaning !!


.

[Pipelayer]

New Cage?


Sent from my iPhone using Tapatalk

[EPL]

New Cage?


Sent from my iPhone using Tapatalk


No one makes a cage I like !! I'm sure I could find someone to make one but would just like to be able to purchase one ready to go !!

[Mike621]

No one makes a cage I like !! I'm sure I could find someone to make one but would just like to be able to purchase one ready to go !!

Have you checked out No Limit Racing? Looks like they can do any kind of cage you want.

[EPL]

Some places make them but none short enough, there all up to 4" lower and I want 6 or 8 lower.

Sent from my SM-G950U using Tapatalk

[EPL]

I'm thinking about giving it a hair cut !!

Sent from my SM-G950U using Tapatalk

[Pipelayer]

Maybe there wasn’t enough short people ordering them.... jus sayin


Sent from my iPhone using Tapatalk

[EPL]

Blah Blah Blah !! Everyone that is close to what I want has what they call the sand cut with the high front!!

Sent from my SM-G950U using Tapatalk

[lainracing]

When you have free time I would like to cot my cage down


Sent from my iPhone using Tapatalk

[EPL]

I'll help you cut it anytime your ready to weld it !!

Sent from my SM-G950U using Tapatalk

[lainracing]

Do I need anything


Sent from my iPhone using Tapatalk

[EPL]

Do I need anything


Sent from my iPhone using TapatalkNo I have everything!!

Sent from my SM-G950U using Tapatalk

[lainracing]

Tomorrow Lol


Sent from my iPhone using Tapatalk

[EPL]

Come on over !!

Sent from my SM-G950U using Tapatalk

[lainracing]

What time


Sent from my iPhone using Tapatalk

[EPL]

What time


Sent from my iPhone using TapatalkAny time after 9. Just let me know what time .

Sent from my SM-G950U using Tapatalk

[lainracing]

Ok I’ll be up there by 10


Sent from my iPhone using Tapatalk

[EPL]

Ok I’ll be up there by 10


Sent from my iPhone using TapatalkSee you then !!

Sent from my SM-G950U using Tapatalk

[lainracing]

[emoji106]


Sent from my iPhone using Tapatalk

[EPL]

Put some color on the beadlock rings !!


.

[lainracing]

Looks good


Sent from my iPhone using Tapatalk

[EPL]

There was alot getting done today !!


.

[lainracing]

Ed helped me chop my cage 5 inches https://uploads.tapatalk-cdn.com/20190107/337ea8082ac47c50cd5a2d1e82276bd1.jpghttps://uploads.tapatalk-cdn.com/20190107/336e15e71886ac9940b40f7dcc4e13eb.jpghttps://uploads.tapatalk-cdn.com/20190107/c01ff840d00ff7f8c08d2354a272a23e.jpghttps://uploads.tapatalk-cdn.com/20190107/d04157c6dae84329beb6bc487ef9553c.jpg


Sent from my iPhone using Tapatalk

[Mike621]

Ed helped me chop my cage 5 inches https://uploads.tapatalk-cdn.com/20190107/337ea8082ac47c50cd5a2d1e82276bd1.jpghttps://uploads.tapatalk-cdn.com/20190107/336e15e71886ac9940b40f7dcc4e13eb.jpghttps://uploads.tapatalk-cdn.com/20190107/c01ff840d00ff7f8c08d2354a272a23e.jpghttps://uploads.tapatalk-cdn.com/20190107/d04157c6dae84329beb6bc487ef9553c.jpg


Sent from my iPhone using Tapatalk

Good job Bob, looks good. [emoji1417]

[lainracing]

Don and ed Rzr chops https://uploads.tapatalk-cdn.com/20190107/746e4be317fc7989326dbe1e2d67dc1f.jpghttps://uploads.tapatalk-cdn.com/20190107/889b80a4e78d986e5755c4c509b3862e.jpghttps://uploads.tapatalk-cdn.com/20190107/dd0b2d0544f5516327a269cb3563e0ca.jpghttps://uploads.tapatalk-cdn.com/20190107/074be0496a4a12f108050a86af1d19c4.jpg


Sent from my iPhone using Tapatalk

[Pipelayer]

Looks great


Sent from my iPhone using Tapatalk

[EPL]

Mounting up some new tires for Don (oldplumber) !!


https://uploads.tapatalk-cdn.com/20190108/226c0227a7ea35548fa4c931faf9fe0d.jpg

Sent from my SM-G950U using Tapatalk

[Mike621]

Mounting up some new tires for Don (oldplumber) !!


https://uploads.tapatalk-cdn.com/20190108/226c0227a7ea35548fa4c931faf9fe0d.jpg

Sent from my SM-G950U using Tapatalk

Nice looking setup. [emoji1417]

[The Rattler (BLR)]

I drove ours today to Beer Bellys [emoji481]https://uploads.tapatalk-cdn.com/20190111/8519b90bb37ae02350c3d04222c4a9c7.jpg

Sent from BLR Logistics

[lainracing]

Mounting up some new tires for Don (oldplumber) !!


https://uploads.tapatalk-cdn.com/20190108/226c0227a7ea35548fa4c931faf9fe0d.jpg

Sent from my SM-G950U using Tapatalk

[emoji1303]


Sent from my iPhone using Tapatalk

[EPL]

Installed a light bar on the S !!


https://uploads.tapatalk-cdn.com/20190123/10b1874ea89e3b0b2667ecee23c805d1.jpg

Sent from my SM-G950U using Tapatalk

[lainracing]

Nice I got my chase light working


Sent from my iPhone using Tapatalk

[Jmill1082]

New methods and mongrels for the weekend.


Sent from my iPhone using Tapatalkhttps://uploads.tapatalk-cdn.com/20190123/518040c7315a4acdbecad68080a59ea9.jpg

[lainracing]

Just installed pass through bezels on my stock seat . 50.00 for both seat not real hard to do just takes a little time. Harness are a lot more comfortable now cheap fix vs 900.00 seats


https://uploads.tapatalk-cdn.com/20190129/501f90a48b06732c9f531289fec09665.jpghttps://uploads.tapatalk-cdn.com/20190129/db3abde9e4abd6fc79345ea0c53c32a1.jpghttps://uploads.tapatalk-cdn.com/20190129/c2c63ed1acf1f29fc2ccc786cab9b6b2.jpg


Sent from my iPhone using Tapatalk

[Mike621]

Looks really good Bob. [emoji1417]

[EPL]

Just installed pass through bezels on my stock seat . 50.00 for both seat not real heart to do just takes a little time. Harness are a lot more comfortable now cheap fix vs 900.00 seats


Looks good !!

[lainracing]

Thanks I’ve got lowering seat bases form Rock Ready Utv out of Sacramento coming this week.


Sent from my iPad using Tapatalk

[EPL]

I know you have had the pass thru before on other seats but Don had the take the seat belts out of his because Julie had a problem with where they came out and how it was pushing on her shoulders !!

[EPL]

Finished a custom mount to hold the Rotopax !!https://uploads.tapatalk-cdn.com/20190129/6d1b8bb56d5edf7eff10e8033f7b6476.jpg

Sent from my SM-G950U using Tapatalk

[Jmill1082]

Tore apart the front diff. Got a weird chatter/grinding noise up there. Hopefully it’s just the infamous plastic sprague. We will see. And I finall put on the rockblokz mud flaps/trailing arm guards.



https://uploads.tapatalk-cdn.com/20190129/022c180d76c4ac1a8a2f1a6f9399be7d.jpghttps://uploads.tapatalk-cdn.com/20190129/83d08944f94e4436d8aa6ea14c63de14.jpghttps://uploads.tapatalk-cdn.com/20190129/af45c1110224bf72d76f62f09a224c2a.jpg


Sent from my iPhone using Tapatalk

[lainracing]

Finished a custom mount to hold the Rotopax !!https://uploads.tapatalk-cdn.com/20190129/6d1b8bb56d5edf7eff10e8033f7b6476.jpg

Sent from my SM-G950U using Tapatalk

That came out nice


Sent from my iPad using Tapatalk

[lainracing]

Tore apart the front diff. Got a weird chatter/grinding noise up there. Hopefully it’s just the infamous plastic sprague. We will see. And I finall put on the rockblokz mud flaps/trailing arm guards.https://uploads.tapatalk-cdn.com/20190129/022c180d76c4ac1a8a2f1a6f9399be7d.jpghttps://uploads.tapatalk-cdn.com/20190129/83d08944f94e4436d8aa6ea14c63de14.jpghttps://uploads.tapatalk-cdn.com/20190129/af45c1110224bf72d76f62f09a224c2a.jpg


Sent from my iPhone using Tapatalk

[emoji106]


Sent from my iPad using Tapatalk

[EPL]

Tore apart the front diff. Got a weird chatter/grinding noise up there. Hopefully it’s just the infamous plastic sprague. We will see. And I finall put on the rockblokz mud flaps/trailing arm guards.



https://uploads.tapatalk-cdn.com/20190129/af45c1110224bf72d76f62f09a224c2a.jpg


Sent from my iPhone using Tapatalk


Where did you get the trailing arm flaps at ??

[Jmill1082]

I found them online in one of the forums. But here is the link to the website of the brand I have.

https://rokblokz.com/collections/polaris-mud-flaps-guards

I haven’t tried them out yet but they seem like they will work pretty good and keep my trailing arm from getting beat by rocks.


Sent from my iPhone using Tapatalk

[Mike621]

I add a little bling to the bumper I made for the Yamaha.
https://uploads.tapatalk-cdn.com/20190129/dea6fb80b0f800132872e56d3b448730.jpg
Some tie down links, and some work/ backup lights.

[EPL]

I add a little bling to the bumper I made for the Yamaha.

Some tie down links, and some work/ backup lights.

Nice !!

[Jmill1082]

I add a little bling to the bumper I made for the Yamaha.
https://uploads.tapatalk-cdn.com/20190129/dea6fb80b0f800132872e56d3b448730.jpg
Some tie down links, and some work/ backup lights.

That looks real nice! Giving me ideas for the mule.


Sent from my iPhone using Tapatalk

[EPL]

Installed Polaris rock sliders !!



https://uploads.tapatalk-cdn.com/20190201/e332b1279574b0e19460b35fc56e2a78.jpg

Sent from my SM-G950U using Tapatalk

[lainracing]

I’ll purchasing these next


Sent from my iPhone using Tapatalk

[AlfaBaz]

Installed Polaris rock sliders !!



https://uploads.tapatalk-cdn.com/20190201/e332b1279574b0e19460b35fc56e2a78.jpg



Sent from my SM-G950U using Tapatalk

When does it get wrapped?

[EPL]

When does it get wrapped?


When we get back and know what I want !!

[EPL]

Put some Rokblokz flaps on the trailing arms!!


https://uploads.tapatalk-cdn.com/20190203/ac0fe5dc8444546bf2768b7d54421c02.jpg

Sent from my SM-G950U using Tapatalk

[Mike621]

Put some Rokblokz flaps on the trailing arms!!


https://uploads.tapatalk-cdn.com/20190203/ac0fe5dc8444546bf2768b7d54421c02.jpg

Sent from my SM-G950U using Tapatalk

Nice looking mud flaps. [emoji1417]

[Sweet34]

Installed Polaris rock sliders !!



https://uploads.tapatalk-cdn.com/20190201/e332b1279574b0e19460b35fc56e2a78.jpg




Sent from my SM-G950U using Tapatalk


Sweet looking ride .

[lucasgreen382]

Tore apart the front diff. Got a weird chatter/grinding noise up there. Hopefully it’s just the infamous plastic sprague. We will see. And I finall put on the rockblokz mud flaps/trailing arm guards.



https://uploads.tapatalk-cdn.com/20190129/022c180d76c4ac1a8a2f1a6f9399be7d.jpghttps://uploads.tapatalk-cdn.com/20190129/83d08944f94e4436d8aa6ea14c63de14.jpghttps://uploads.tapatalk-cdn.com/20190129/af45c1110224bf72d76f62f09a224c2a.jpg


Sent from my iPhone using TapatalkThose rock blokz there out awesome.

Sent from my SM-G955U using Tapatalk

[lucasgreen382]

Where did you get the trailing arm flaps at ??There rock blokz. There aweosme. I also got a set after seeing his on.

Sent from my SM-G955U using Tapatalk

[lainracing]

I got my Rock Ready Utv lowering seat bases in so much nicer


Sent from my iPad using Tapatalk

[Mike621]

I got my Rock Ready Utv lowering seat bases in so much nicer


Sent from my iPad using Tapatalk

Get some of that head room back after lowering the cage. [emoji1417]

[EPL]

Get some of that head room back after lowering the cage. [emoji1417]

Tall person problem !! LOL

[lainracing]

[emoji23]


Sent from my iPad using Tapatalk

[Ed Harvey]

Put this on today ready for the next stormhttps://uploads.tapatalk-cdn.com/20190224/fbe1388018083a7d0ac47789dd02692d.jpg

Sent from my SM-G960U using Tapatalk

[EPL]

Put this on today ready for the next stormhttps://uploads.tapatalk-cdn.com/20190224/fbe1388018083a7d0ac47789dd02692d.jpg

Sent from my SM-G960U using TapatalkI don't want to live anywhere that is needed !! LOL

Sent from my SM-G950U using Tapatalk

[Ed Harvey]

I don't want to live anywhere that is needed !! LOL

Sent from my SM-G950U using TapatalkYou could have used it a few weeks ago. Ha
The quad plow is on its last leg that last storm got it

Sent from my SM-G960U using Tapatalk

[TBluth]

Added harness inserts in preparation for new cage......


3074

3075

3077

3078

[EPL]

Added harness inserts in preparation for new cage......


3074

3075

3077

3078Looks good !!

Sent from my SM-G950U using Tapatalk

[Kmorse19]

Just ordered a new set of rims and tires and waiting for them to get here !

[Mike621]

So I ordered a new OEM upper Right Control Arm for my X3.


https://uploads.tapatalk-cdn.com/20190325/e1851678b894d639c3c40bd7b06cf351.jpg


Pulled the Broken one off yesterday, to me it looks like it was cracked already then it broke the rest of the way, I do ride it hard, I can’t remember how many times I’ve bottomed out, or hit rocks. In this picture you can see part of the Break it rusty.


https://uploads.tapatalk-cdn.com/20190325/0c3836d6962a5908d4ca4deab97c05c3.jpg

[EPL]

So I ordered a new OEM upper Right Control Arm for my X3.

Pulled the Broken one off yesterday, to me it looks like it was cracked already then it broke the rest of the way, I do ride it hard, I can’t remember how many times I’ve bottomed out, or hit rocks. In this picture you can see part of the Break it rusty.






That is what Len said when we were on the side of the road , He thought it looked like it started at the weld for the bracket on top !!

[Mike621]

Well got everything back together, I welded in some cross supports on the upper A-Arms, installed some new BSD Shock Therapy Tie Rods. Everything looks pretty solid now, going to take it to Prairie City UTV track on Sunday see how it holds up[emoji1693]here’s a couple more pictures. https://uploads.tapatalk-cdn.com/20190328/29cbc682b65689907cfe1d470941b6c3.jpghttps://uploads.tapatalk-cdn.com/20190328/6cb7247680996c99ab3671daed140a73.jpghttps://uploads.tapatalk-cdn.com/20190328/df392b3daf94be52c2016e21c89cde1d.jpg

[EPL]

Looks good Mike !!

[lainracing]

So did you just fix the stock one ?


Sent from my iPhone using Tapatalk

[Mike621]

So did you just fix the stock one ?


Sent from my iPhone using Tapatalk

No I bought a new one, then added the cross brace, the new one came off an 19’ X3, it has better support bracket on it, so they definitely made some upgrades from 17’

[lainracing]

Excellent [emoji106]


Sent from my iPad using Tapatalk

[Mike621]

Got my RLB light bar install, works sweet, now you’ll be able to see me Jeffro [emoji1417]. https://uploads.tapatalk-cdn.com/20190404/637624e9010429f9cfa8d5c4fcb5e960.jpg

[Scrat]

Looks good .

[EPL]

Got my RLB light bar install, works sweet, now you’ll be able to see me Jeffro [emoji1417]. https://uploads.tapatalk-cdn.com/20190404/637624e9010429f9cfa8d5c4fcb5e960.jpg

Looks familiar !!

[Mike621]

Looks familiar !!

Yeah it’s a really nice light bar, well made, and they stand behind there products.
I returned those whip lights, it was a hassle, but a really funny story, I’ll tell you about it next time We get together [emoji1417]

[Maverick4me]

Got the new Shock Therapy Billet Steering Rack, Limit Straps, and the S&B Helmet Blower Installed. Thanks Jason from Furlong Motorsports for all your help!

3121

3122

[Ed & Charlene]

DREAM MACHINE


https://www.youtube.com/watch?v=rs-p7qlOk3M&t=28s

[Jeepalive]

Put on superatv long arm kit and installed a pumper system.

https://uploads.tapatalk-cdn.com/20190518/ccdbb6eaebe969e6540905bcbe0a8bbf.jpg

https://uploads.tapatalk-cdn.com/20190518/4f458a7745b45610b7c437f397809c08.jpg

https://uploads.tapatalk-cdn.com/20190518/35e735f8ae334a3792bab6fdb8c18ee8.jpg

[Ruckzuck]

Put on superatv long arm kit and installed a pumper system.

https://uploads.tapatalk-cdn.com/20190518/ccdbb6eaebe969e6540905bcbe0a8bbf.jpg




So how wide are you now ?

[Jeepalive]

So how wide are you now ?

Right about 73”. With a 5x2 wheel

[Mike621]

Looks good Scott, your going to like that pumper kit, I sure like mine when riding in dust, which seems like all the time lol.

[EPL]

Seems like a lot of people have been getting the pumper set ups !!

[The Rattler (BLR)]

Seems like a lot of people have been getting the pumper set ups !!I will stay as a rattler and not need a pumper system

Sent from BLR Logistics

[Jeepalive]

Looks good Scott, your going to like that pumper kit, I sure like mine when riding in dust, which seems like all the time lol.

It’s so nice! Went out for a ride today and was staying right behind my brother to test it out and didn’t get any dust. I’m sure it will be nice riding on those hot summer days having cool air blown right onto your head also

[Mike621]

Got all the old nasty Control Arms removed , now waiting for the new Super Atv Arms to come in, I think Friday. https://uploads.tapatalk-cdn.com/20190521/7216a5c45c90621dbf2e71c18b899d6f.jpghttps://uploads.tapatalk-cdn.com/20190521/abc1c5085d74c4cfc3f2d5cf48e9e608.jpg

[The Rattler (BLR)]

Got all the old nasty Control Arms removed , now waiting for the new Super Atv Arms to come in, I think Friday. https://uploads.tapatalk-cdn.com/20190521/7216a5c45c90621dbf2e71c18b899d6f.jpghttps://uploads.tapatalk-cdn.com/20190521/abc1c5085d74c4cfc3f2d5cf48e9e608.jpgNow you need to get your retractable harnesses installed that you bought

Sent from BLR Logistics

[Mike621]

Now you need to get your retractable harnesses installed that you bought

Sent from BLR Logistics

Yeah couldn’t pass those up at that price. [emoji1417]

[Mike621]

Got it all back together, new A-Arms , bushings, and Heavy Duty Ball Joints, it was a lot of work, but everything from Super ATV fit really good. The New A-Arms feel and look 100% better than the stock ones, hopefully they hold up and last 100% better than the stock ones. https://uploads.tapatalk-cdn.com/20190530/afb09164d0e17acc4ea194b7febd0dc6.jpghttps://uploads.tapatalk-cdn.com/20190530/ef2b7606436e1d10516e0a09b7d62a18.jpg

[EPL]

Got it all back together, new A-Arms , bushings, and Heavy Duty Ball Joints, it was a lot of work, but everything from Super ATV fit really good. The New A-Arms feel and look 100% better than the stock ones, hopefully they hold up and last 100% better than the stock ones. https://uploads.tapatalk-cdn.com/20190530/afb09164d0e17acc4ea194b7febd0dc6.jpghttps://uploads.tapatalk-cdn.com/20190530/ef2b7606436e1d10516e0a09b7d62a18.jpg

Did you do upper and lower or just upper ??

[Mike621]

Did you do upper and lower or just upper ??

Yeah upper and lower. [emoji1417]

[lucasgreen382]

Got the new hood on. Changes the look big time. Took a long time to find a white one. https://uploads.tapatalk-cdn.com/20190530/b3fbdd3f8f35668b34f3a5473bc131f3.jpg

Sent from my SM-G955U using Tapatalk

[lucasgreen382]

Did you do upper and lower or just upper ??Looks good.

Sent from my SM-G955U using Tapatalk

[Mike621]

Installed a fuel door on the RZR. [emoji1417]https://uploads.tapatalk-cdn.com/20191222/1954aa6df30868d9cecfbde8259132c3.jpghttps://uploads.tapatalk-cdn.com/20191222/95bdf4a46b8577f3680442ba34d7fdba.jpg

[EPL]

Installed a fuel door on the RZR. [emoji1417]https://uploads.tapatalk-cdn.com/20191222/1954aa6df30868d9cecfbde8259132c3.jpghttps://uploads.tapatalk-cdn.com/20191222/95bdf4a46b8577f3680442ba34d7fdba.jpg

A locking fuel door ? Are you having problems with fuel theft on the trails ? LOL

[Mike621]

Don’t want anybody putting anything funny in my gas tank. [emoji12]

Really just wanted it so dirt and mud doesn’t cake up around the gas cap. [emoji1417]

[TBluth]

Got the new hood on. Changes the look big time. Took a long time to find a white one. https://uploads.tapatalk-cdn.com/20190530/b3fbdd3f8f35668b34f3a5473bc131f3.jpg

Sent from my SM-G955U using Tapatalk


Where did you find the white hood? I've been looking for one.

[LBR]

Don’t want anybody putting anything funny in my gas tank. [emoji12]

Really just wanted it so dirt and mud doesn’t cake up around the gas cap. [emoji1417]

Less wind tubulance so as to speed up in front of EPL for the lead is my guess!.,[emoji1787][emoji1787]

[Mike621]

Installed new Schmidty Racing Suspension High Volume Nitrogen End Caps, looked like my stock ones leaked a little, set these at 200psi a little more volume, hopefully they will hold the Nitrogen now.
https://uploads.tapatalk-cdn.com/20200726/a17c088e050ac69466511069ec110c21.jpg
https://uploads.tapatalk-cdn.com/20200726/a89165d06367a78a5aae3fff26b9dcd3.jpg

[lowranger]

Looks good!

[Mike621]

Well we’ll see how they work[emoji1417]

[Scrat]

Installed new Schmidty Racing Suspension High Volume Nitrogen End Caps, looked like my stock ones leaked a little, set these at 200psi a little more volume, hopefully they will hold the Nitrogen now.
https://uploads.tapatalk-cdn.com/20200726/a17c088e050ac69466511069ec110c21.jpg
https://uploads.tapatalk-cdn.com/20200726/a89165d06367a78a5aae3fff26b9dcd3.jpg

Nice upgrade .

[EPL]

I dropped mine off for a new look !! Before picture !!

https://uploads.tapatalk-cdn.com/20201215/d393e5d0ef74ed1981fea4da53b6abeb.jpg

Sent from my SM-G973U using Tapatalk

[lainracing]

New Trinity Racing Exhausthttps://uploads.tapatalk-cdn.com/20201225/639d115712ad7f3dbfeafadb36ee272f.jpg


Sent from my iPhone using Tapatalk

[lainracing]

New billet tie rods from Super Atvhttps://uploads.tapatalk-cdn.com/20201225/148c85c6228b558e99e562c35b24f61a.jpg


Sent from my iPhone using Tapatalk

[Scrat]

New Trinity Racing Exhausthttps://uploads.tapatalk-cdn.com/20201225/639d115712ad7f3dbfeafadb36ee272f.jpg


Sent from my iPhone using Tapatalk

Nice looking exhaust

[Mike621]

So finally got my Garmin GPS mounted and wired permanently , about time right. https://uploads.tapatalk-cdn.com/20201228/7beca327ebfbe4812200720e4f52c455.jpg

Also upgraded to the new Software on Ride Command and was playing around with the new gauge’s , so the one I really like is the Turbo Boost gauge also like how it tells you the % of fuel you have left in the tank. https://uploads.tapatalk-cdn.com/20201228/e2d687ddd44392dc0f271bf26822bbff.jpg

[EPL]

Put a new larger fuel tank in my Turbo S !! Not a fun job !!

https://uploads.tapatalk-cdn.com/20201228/df0886870d242f2933e3f4f69f32605d.jpghttps://uploads.tapatalk-cdn.com/20201228/de9ceddaa07e0ac4dd61ad4def3a8f1a.jpg
https://uploads.tapatalk-cdn.com/20201228/e4984d4d3dcc811eeaaa860369f2b3e5.jpg

Sent from my SM-G973U using Tapatalk

[Mike621]

Yeah Crazy, have to take the whole car apart , but I took my time, cleaned some stuff up down there, ran my vent line inside the rear frame , like Russell did. IMO totally worth it specially on those long desert rides.

[EPL]

Yeah Crazy, have to take the whole car apart , but I took my time, cleaned some stuff up down there, ran my vent line inside the rear frame , like Russell did. IMO totally worth it specially on those long desert rides.

i know Russell said he ran his his vent line in the rear frame , did it not fit the way it was from the factory ? My vent line hooked up fine ! The one problem I did have was I had to reroute the shifter cable !

[AlfaBaz]

Yeah Crazy, have to take the whole car apart , but I took my time, cleaned some stuff up down there, ran my vent line inside the rear frame , like Russell did. IMO totally worth it specially on those long desert rides.

Sure wish I had the skills to do this kind of thing.

[EPL]

Installing new tender springs !!

https://uploads.tapatalk-cdn.com/20201228/6c8092ca611b21f5fc54c353a2422f23.jpg

Sent from my SM-G973U using Tapatalk

[Mike621]

i know Russell said he ran his his vent line in the rear frame , did it not fit the way it was from the factory ? My vent line hooked up fine ! The one problem I did have was I had to reroute the shifter cable !

I had to reroute the cable also, we just extended the vent line in the rear of the car to run down just in case, but I don’t think gas is going to come out of it, unless you end up on your side lol

[EPL]

With the new tender springs I now have my ride hight back !!


https://uploads.tapatalk-cdn.com/20201229/134ad5bffecebf21ee975e26e45e0a47.jpg

Sent from my SM-G973U using Tapatalk

[LBR]

With the new tender springs I now have my ride hight back !!


https://uploads.tapatalk-cdn.com/20201229/134ad5bffecebf21ee975e26e45e0a47.jpg

Sent from my SM-G973U using TapatalkNice wrap dude!!

[Sandiam]

With the new tender springs I now have my ride hight back !!


https://uploads.tapatalk-cdn.com/20201229/134ad5bffecebf21ee975e26e45e0a47.jpg

Sent from my SM-G973U using Tapatalk


How much ground clearance do you have ?

[Mike621]

Looks really good Ed, [emoji1417]

[EPL]

How much ground clearance do you have ?

16" front and 16 1/2" rear !!

[LBR]

I ordered our new springs Nov 24 and still waiting for shipment....knew we would be waiting for 40-60 days for them to be made, so was no surprise....supposed to be shipped in January sometime (hopehope).

[EPL]

I ordered our new springs Nov 24 and still waiting for shipment....knew we would be waiting for 40-60 days for them to be made, so was no surprise....supposed to be shipped in January sometime (hopehope).


That's what happens when you have a Canned Ham !! LOL I was surprized I got mine in 4-5 days , was expecting months !!

What springs are you getting ?

[LBR]

That's what happens when you have a Canned Ham !! LOL I was surprized I got mine in 4-5 days , was expecting months !!

What springs are you getting ?Getting the Eibach stage 2 springs on all corners that will raise the ride height up higher and also will give more extension/compression flex for a softer ride.

[EPL]

Nice wrap dude!!Not identical twins !!




https://uploads.tapatalk-cdn.com/20210109/b1c0135ef84b39f552dff39973d2aca0.jpghttps://uploads.tapatalk-cdn.com/20210109/ceee11fe3d319c8d981b213812c52305.jpg

Sent from my SM-G973U using Tapatalk

[Mike621]

Lookin good Ed. [emoji1417][emoji482]

[EPL]

Lookin good Ed. [emoji1417][emoji482]

Thanks Mike !!

[Mike621]

Got my Tender springs installed, and my shocks serviced, I had the Right rear Shock leaking from the Solenoid, Fox warranty it, and replace all the oil and seals, they said the oil in my front shocks was toast , tested at PC today, it’s sitting at 17” front and back, I think it’s riding to high in the stroke , going to lower it to 16” then it should be perfect.
https://uploads.tapatalk-cdn.com/20210111/957de9600b0921fb597bb08c7b9b2269.jpg
https://uploads.tapatalk-cdn.com/20210111/118a4db1baf35a07c9f033f441304072.jpg

[EPL]

Got my Tender springs installed, and my shocks serviced, I had the Right rear Shock leaking from the Solenoid, Fox warranty it, and replace all the oil and seals, they said the oil in my front shocks was toast , tested at PC today, it’s sitting at 17” front and back, I think it’s riding to high in the stroke , going to lower it to 16” then it should be perfect.
https://uploads.tapatalk-cdn.com/20210111/957de9600b0921fb597bb08c7b9b2269.jpg
https://uploads.tapatalk-cdn.com/20210111/118a4db1baf35a07c9f033f441304072.jpg


Since I replaced my tender springs I have 16" front and 16.5" rear but figure after i put all the junk in the box it should be 16" rear also !!

[Mike621]

Yeah I think 16” should work good, 17” on the UTV track I couldn’t get it to flatten out in the corners and just nail the throttle, was getting more body roll than usual.

[EPL]

Put some new shoes on the Turbo S today.

https://uploads.tapatalk-cdn.com/20210808/01f4aabfc16d7e4492e99cf5e3d94976.jpg

Sent from my SM-G973U using Tapatalk

[The Rattler (BLR)]

Finally got around to putting our new shoes on also.
Along with new Eibach springs front and rear, and new brake pads front and rear.
All maintenance is done for the next Crazies outing at Sand Mountain and Dove Springs in October..

Heading east next week to begin our trek to Sand Mountain.
https://uploads.tapatalk-cdn.com/20210810/732153e3c99652b139132f9474d9494a.jpg

Sent from my moto z4 using Tapatalk

[The Rattler (BLR)]

Well Lance did it this time..LOL
The front end literally fell off.
Close to 11,000smiles we needed to do some maintenance on her..

Sent from my moto z4 using Tapatalk

[EPL]

Well Lance did it this time..LOL
The front end literally fell off.
Close to 11,000smiles we needed to do some maintenance on her..

Sent from my moto z4 using Tapatalk

Pictures !!

[drtfun]

Bad, Lance!

[The Rattler (BLR)]

It's starting to go back together, so he sayshttps://uploads.tapatalk-cdn.com/20220727/8752caae952bfb88bbc403b8b53ddbc0.jpg

Sent from my moto z4 using Tapatalk

[The Rattler (BLR)]

It's all back together for another 10,000 smiles.https://uploads.tapatalk-cdn.com/20220828/1879c5e3ddbe5077a86abd70cb82ab01.jpg

Sent from my moto z4 using Tapatalk

[EPL]

looking good , see you in January !

[The Rattler (BLR)]

Yes you will, looking forward to it

Sent from my moto z4 using Tapatalk